R2500 thru R5000 High Voltage General Purpose Plastic Rectifiers Reverse Voltage 2500 to 5000V Forward Current 0.2A Feature & Dimensions * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Low leakage Low forward voltage drop High current capability Easily cleaned with Freon,Alcohol,Lsopropanol and similar solvents * Deffused junction * Capable of meeting environmental standards of MIL-S-19500 * High temperature soldering guaranteed: * * * * 260°C/10 seconds Mechanical Data Case: JEDEC DO-15, molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.015oz., 0.40g Handling precautin:None We declare that the material of product compliance with ROHS requirements 1.Electrical Characteristic Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified. R R R R Parameter Symbol symbol 2500 3000 4000 5000 device marking code R2500 R3000 R4000 R5000 VRRM Maximum repetitive peak reverse voltage 2500 3000 4000 5000 Unit V Maximum RMS voltage VRMS 1750 2100 2800 3500 V Maximum DC blocking voltage VDC 2500 3000 4000 5000 V Maximum average forward rectified current 0.375" (9.5mm) lead length at TA = 50°C Peak forward surge current 8.3ms single half sinewave superimposed on rated load (JEDEC Method) Typical thermal resistance (Note 1) Operating junction and storage temperature range 0.2 IF(AV) IFSM RθJA TJ, TSTG 25 A 15 A 35 –50 to +150 Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. R R Parameter Symbol symbol R2500 3000 4000 VF Maximum instantaneous forward voltage at IF(AV) 3.0 4.0 Maximum DC reverse current TA = 25°C at rated DC blocking voltage TA = 100°C IR 5.0 100 Typical junction capacitance at 4.0V, 1MHz CJ 15 NOTES: 1. Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted °C/W °C R 5000 5.0 Unit V µA PF R2500 thru R5000 2. Characteristic Curves ( TA = 25°C unless otherwise noted ) Fig. 2 – Maximum Non-repetitive Peak Forward Surge Current Average Forward Rectified Current (A) 60 Hz Resistive or Inductive Load 0.2 0.1 0.375" (9.5mm) Lead Length 0 0 Fig 3. – Typical Instantaneous Forward Characteristics Instantaneous Forward Current (A) 10 TJ = 25°C Pulse width = 300µs 1% Duty Cycle 1.0 0.1 0.01 TJ = TJ max 8.3ms Single Half Sine-wave (JEDEC Method) 20 15 10 5 0 1 100 1000 100 Tj=100℃ 10 1.0 Tj=25℃ 0.1 1.6 2.6 3.6 4.6 5.6 Instantaneous Forward Voltage (V) Fig 5. –typical transient thermal impedance 10 Number of Cycles at 60Hz Fig 4. – Typical Reverse Characteristics 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig 6. – Typical Junction Capacitance Junction Capacitance (pF) Transient thermal impedance(°C/W) 0.001 0.6 100 25 25 50 75 100 125 150 175 Ambient Temperature, °C Instantaneous Reverse Current (µA) Average Forward Rectified Current (A) Fig. 1 – Forward Current Derating Curve 10 1.0 0.1 TJ = 25°C f = 1.0 MHz Vsig = 50mVp-p 100 10 1 0.01 0.1 1.0 10 t,Pulse duration,sec 100 0.1 1 10 100 Reverse Voltage (V) R2500 thru R5000 3. dimension: 文件编号： WI-250 标题: 塑封生产线轴向产品包装规范 第 4 版 第 第 0 次修改 1 页 1 弹带盒装 ammo and box 1.1. 弹带盒规格 ammo spec. 单位：mm L W H T52 262±2 76±2 90±2 T42 T26 262±2 250±3 64±2 45±3 90±2 95±3 1.2 弹带内盒要求 inner box spec. ROHS标签 label LRC标签 label 文件编号： WI-250 标题: 塑封生产线轴向产品包装规范 第 4 版 第 第 0 次修改 2 页 1.4 标签要求 label spec. 1.4.1 LRC标签 LRC label ******* 成型规格forming spec. LRC产品型号 type 产品重复峰压值 peak repetive voltage **** 产品额定电流值 average output current ** 产品数量 quantity **** ******* 产品生产日期 date 1.4.2环保标签 environmental protection label 2.外箱规格 cartoon spec. 单位：mm H W L W H T52 430±2 280±2 225±2 T42 410±2 285±2 300±2 T26 435±3 280±3 295±3 外箱标签cartoon label L 3 按以上包装方式，编带数量和外包装箱产品数量：typing and cartoon spec. 塑封外型 A-405 & DO-41 & R-1 R-3 DO-15 DO-201AD 每根编带数量 quantity/ammo 3K 1.8K 2K(T52) 1.8K(T26) 0.8K 外箱数量（T52编带） quantity/cartoon 30K 18K 20K 8.0K 外箱数量（T26编带） quantity/cartoon 60K 36K 36K - 外箱数量（T42编带） quantity/cartoon 54K 32.4K 36K - 文件编号： WI-250 标题: 塑封生产线轴向产品包装规范 第 4 版 第 0 次修改 第 3 页 4 编带规格 brede spec 编带尺寸 typing dimension 尺寸代号 W 26/tape 35/tape 40/tape 26 0.0/+1.6 35 -1.0/+0.5 40 -1.0/+0.5 42/tape 52/tape 52/tape# 42 -1.0/+1.0 52 -1.0/+2.0 52 -1.0/+2.0 P 5±0.5 5±0.5 5±0.5 5±0.5 5±0.5 L1-L2 ＜1.0 ＜1.0 ＜1.0 ＜1.0 ＜1.2 H 6±1.0 6±1.0 6±1.0 6±1.0 6±1.0 10±0.5 ＜1.2 6±1.0 Z ＜1.0 ＜1.0 ＜1.0 ＜1.0 ＜1.0 ＜1.0 R ＜1.0 ＜1.0 ＜1.0 ＜1.0 ＜1.0 ＜1.0 T ＞3.5 ＞3.5 ＞3.5 ＞3.5 ＞3.5 注: 52编带# 为DO-201AD编带规格 "52编带#" just for D0-201AD ＞3.5 1. 红白编带厚度为0.05mm；两种胶带各自之间无明显色差；编带要求均为胶带。 The typing thickness is 0.05mm and color is obvious difference 2. 两端引带20~40cm. Typing lead over 20~40cm 3. 红色编带一端为二极管“负极”；白色编带一端为二极管“正极”。 red color is cathode ,white color is anode 4. 无卤 green epoxy compound（无卤产品才贴HF only） Green R2500 thru R5000 4. Update Record 版次 1 更新记录 第一版 更新作者 余波 更新日期 2010-11-18