Luckylight 2×5mm Bi-Color With Common Cathode Type Hi-Eff Red & Yellow Green LED Technical Data Sheet Part No.: LL-259IGM1G-I1-2A Spec No.: A010 X400 Rev No.: V.2 Date: Dec/26/2005 Approved: JoJo Checked: Wu Drawn: Shu Lucky Light Electronics Co., Ltd. Page: 1 OF 9 Http://www.luckylight.cn Luckylight Features: ◇ Hi-Eff Red and Yellow Green chips are matched for uniform light output. ◇ With Common Cathode. ◇ Long life solid state reliability. ◇ Low power consumption. ◇ I.C. compatible. ◇ The product itself will remain within RoHS complaint Version. Descriptions: ◇ The lamp contain two integral chips and is available bicolor. ◇ The Hi-Eff Red and Yellow Green light is emitted by diodes of GaAsP/GaP and GaP respectively. ◇ White Diffused lens color. Applications: ◇ TV set. ◇ Monitor. ◇ Telephone. ◇ Computer. ◇ Circuit board. Spec No.: A010 X400 Rev No.: V.2 Date: Dec/26/2005 Approved: JoJo Checked: Wu Drawn: Shu Lucky Light Electronics Co., Ltd. Page: 2 OF 9 Http://www.luckylight.cn Luckylight Package Dimension: Part No. LL-259IGM1G-I1-2A Chip Material Lens Color I GaAsP/GaP G GaP White Diffused Source Color Hi-Eff Red Yellow Green Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25 mm (.010″) unless otherwise noted. 3. Protruded resin under flange is 1.00mm (.039″) max. 4. Specifications are subject to change without notice. Spec No.: A010 X400 Rev No.: V.2 Date: Dec/26/2005 Approved: JoJo Checked: Wu Drawn: Shu Lucky Light Electronics Co., Ltd. Page: 3 OF 9 Http://www.luckylight.cn Luckylight Absolute Maximum Ratings at Ta=25℃ Parameters Symbol Red Power Dissipation Yellow Green Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Max. Unit 78 PD mW 78 IFP 100 mA Red Chip Forward Current IF 30 mA Yellow Green Chip Forward Current IF 30 mA VR 5 V Reverse Voltage Operating Temperature Range Topr -40℃ to +80℃ Storage Temperature Range Tstg -40℃ to +85℃ Lead Soldering Temperature [4mm (.157″) From Body] Tsld 260℃ for 5 Seconds Spec No.: A010 X400 Rev No.: V.2 Date: Dec/26/2005 Approved: JoJo Checked: Wu Drawn: Shu Lucky Light Electronics Co., Ltd. Page: 4 OF 9 Http://www.luckylight.cn Luckylight Electrical Optical Characteristics at Ta=25℃ Parameters Luminous Intensity * Viewing Angle * Peak Emission Wavelength Dominant Wavelength Forward Voltage Reverse Current Symbol Emitting Color Min. Typ. Max. Red 1 3 --- IV 2θ1/2 λp λd VF IR Yellow Green 1 3 --- Red --- 70 --- Yellow Green --- 70 --- Red --- 640 --- Yellow Green --- 565 --- Red --- 630 --- Yellow Green --- 570 --- Red 1.60 2.00 2.60 Yellow Green 1.60 2.20 2.60 Red --- --- 10 Yellow Green --- --- Unit Test Condition mcd IF=10mA (Note 1) Deg IF=20mA (Note 2) nm IF=20mA nm IF=20mA (Note 3) V IF=20mA µA VR=5V 10 Notes: 1. Luminous Intensity Measurement allowance is ± 10%. 2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. Spec No.: A010 X400 Rev No.: V.2 Date: Dec/26/2005 Approved: JoJo Checked: Wu Drawn: Shu Lucky Light Electronics Co., Ltd. Page: 5 OF 9 Http://www.luckylight.cn Luckylight Typical Electrical / Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Red Forward Current & Forward Voltage Ta=25℃ Ta=25℃ Forward Current IF (mA) 100 75 50 25 0 300 1000 400 500 600 700 Wavelength λp (nm) 50 40 30 20 10 0 800 Luminous Intensity & Ambient Temperature 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta (℃) Ta=25℃ 1000 f=1KHz Duty=1/10 100 10 1 0 10 Forward Current Derating Curve Forward Current IF (mA) 1.6 1.8 2.0 2.2 2.4 2.6 Forward Voltage VF (V) Luminous Intensity & Forward Current Relative Luminous Intensity (%) Relative Luminous Intensity (%) Relative Luminous Intensity (%) Spectrum Distribution 1 2 3 10 10 10 Forward Current IF (mA) Radiation Diagram 50 o 0 o 10 Ta=25℃ o 20 o 30 40 o 40 30 25 20 1.0 0.9 o 0.8 10 0 o 50 0.7 0 20 40 60 80 100 Ambient Temperature Ta (℃) 0.5 0.3 0.10 0.2 0.4 0.6 Spec No.: A010 X400 Rev No.: V.2 Date: Dec/26/2005 Approved: JoJo Checked: Wu Drawn: Shu Lucky Light Electronics Co., Ltd. 60 o 70 o 80o 90 Page: 6 OF 9 Http://www.luckylight.cn Luckylight Yellow Green Forward Current & Forward Voltage Ta=25℃ Ta=25℃ 50 Forward Current IF (mA) 100 75 50 25 0 300 1000 400 500 600 700 Wavelength λp (nm) 40 30 20 10 0 800 Luminous Intensity & Ambient Temperature 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta (℃) Ta=25℃ 1000 Forward Current Derating Curve Forward Current IF (mA) 1.6 1.8 2.0 2.2 2.4 2.6 Forward Voltage VF (V) Luminous Intensity & Forward Current Relative Luminous Intensity (%) Relative Luminous Intensity (%) Relative Luminous Intensity (%) Spectrum Distribution f=1KHz Duty=1/10 100 10 1 0 10 1 2 3 10 10 10 Forward Current IF (mA) Radiation Diagram 50 o 0 o 10 Ta=25℃ o 20 o 30 40 o 40 30 25 20 1.0 0.9 o 0.8 10 0 o 50 0.7 0 20 40 60 80 100 Ambient Temperature Ta (℃) 0.5 0.3 0.10 0.2 0.4 0.6 Spec No.: A010 X400 Rev No.: V.2 Date: Dec/26/2005 Approved: JoJo Checked: Wu Drawn: Shu Lucky Light Electronics Co., Ltd. 60 o 70 o 80o 90 Page: 7 OF 9 Http://www.luckylight.cn Luckylight Reliability Test Items And Conditions: The reliability of products shall be satisfied with items listed below: Confidence level: 90%. LTPD: 10%. 1) Test Items and Results: Test Item Standard Test Method Resistance to Soldering Heat JEITA ED-4701 300 302 Solder ability Thermal Shock Temperature Cycle Moisture Resistance Cycle High Temperature Storage Terminal Strength (Pull test) Terminal Strength (bending test) Temperature Humidity Storage Low Temperature Storage Steady State Operating Life Steady State Operating Life of High Humidity Heat Choice of various viewing angles JEITA ED-4701 300 303 JEITA ED-4701 300 307 JEITA ED-4701 100 105 JEITA ED-4701 200 203 JEITA ED-4701 200 201 JEITA ED-4701 400 401 JEITA ED-4701 400 401 JEITA ED-4701 100 103 JEITA ED-4701 200 202 Test Conditions Note Number of Damaged Tsld=260±5℃, 10sec 3mm from the base of the epoxy bulb Tsld=235±5℃, 5sec(using flux) 1 time 0/100 1time over 95% 0/100 0℃~100℃ 15sec, 15sec 100 cycles 0/100 100 cycles 0/100 10 cycles 0/100 Ta=100℃ 1000hrs 0/100 Load 10N (1kgf) 10±1sec Load 5N (0.5kgf) 0°~90°~0° bend 2 times No noticeable damage No noticeable damage Ta=60℃, RH=90% 1000hrs 0/100 Ta=-40℃ 1000hrs 0/100 Ta=25℃, IF＝30mA 1000hrs 0/100 Ta=60℃, RH=90%, IF=30mA 500hrs 0/100 Ta=-30℃, IF＝20mA 1000hrs 0/100 -40℃~25℃~100℃~25℃ 30min,5min,30min,5min 25℃~65℃~-10℃ 90%RH 24hrs/1cycle 0/100 0/100 2) Criteria for Judging the Damage: Item Symbol Test Conditions Forward Voltage VF Reverse Current Luminous Intensity Criteria for Judgment Min Max IF＝20mA --- F.V.*)×1.1 IR VR=5V --- F.V.*)×2.0 IV IF＝10mA F.V.*)×0.7 --- *) F.V.: First Value. Spec No.: A010 X400 Rev No.: V.2 Date: Dec/26/2005 Approved: JoJo Checked: Wu Drawn: Shu Lucky Light Electronics Co., Ltd. Page: 8 OF 9 Http://www.luckylight.cn Luckylight Please read the following notes before using the product: 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 3. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 4. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. Spec No.: A010 X400 Rev No.: V.2 Date: Dec/26/2005 Approved: JoJo Checked: Wu Drawn: Shu Lucky Light Electronics Co., Ltd. Page: 9 OF 9 Http://www.luckylight.cn