Luckylight 6.22mm×3.68mm Rectangular Type Amber LED Technical Data Sheet Part No.: LL-463ADS Spec No.: 463 Rev No: V.3 Date: Nov./28/2006 Approved: ZHOU Checked: Wu Drawn: Shu Lucky Light Electronics Co., Ltd. Page: 1 OF 7 http://www.luckylight.cn Luckylight Features: ◇ High efficiency. ◇ Choice of various viewing angles ◇ Available on tape and reel. ◇ Reliable and robust. ◇ The product itself will remain within RoHS compliant Version. Descriptions: ◇ The series is specially designed for applications requiring higher brightness. ◇ The LED lamps are available with different colors, intensities. Applications: ◇ TV set. ◇ Monitor. ◇ Telephone. ◇ Computer. Spec No.: 463 Rev No: V.3 Date: Nov./28/2006 Approved: ZHOU Checked: Wu Drawn: Shu Lucky Light Electronics Co., Ltd. Page: 2 OF 7 http://www.luckylight.cn Luckylight Package Dimension: 5.71±0.20 3.68±0.20 3.17±0.20 Light Area Polarity 6.22±0.20 7.11±0.30 0.381 3.68 3.68 1.52 6.22±0.20 Reference Mark May Contain A Number 25.40 Min. 1.5 Min. CATHODE ANODE 0.5 2.54 Part No. Chip Material Lens Color Source Color LL-463ADS GaAsP/GaP Orange Diffused Amber Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25 mm (.010″) unless otherwise noted. 3. Protruded resin under flange is 1.00 mm (.039″) max. 4. Specifications are subject to change without notice. Spec No.: 463 Rev No: V.3 Date: Nov./28/2006 Approved: ZHOU Checked: Wu Drawn: Shu Lucky Light Electronics Co., Ltd. Page: 3 OF 7 http://www.luckylight.cn Luckylight Absolute Maximum Ratings at Ta=25℃ Parameters Symbol Max. Unit Power Dissipation PD 60 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) IFP 100 mA Forward Current IF 25 mA Reverse Voltage VR 5 V Operating Temperature Range Topr -40℃ to +80℃ Storage Temperature Range Tstg -40℃ to +85℃ Lead Soldering Temperature [4mm (.157″) From Body] Tsld 260℃ for 5 Seconds Electrical Optical Characteristics at Ta=25℃ Parameters Symbol Min. Luminous Intensity * Typ. Max. Unit Test Condition IV 8 15 --- mcd IF=20mA (Note 1) 2θ1/2 --- 110 --- Deg IF=20mA (Note 2) Peak Emission Wavelength λp --- 610 --- nm IF=20mA Dominant Wavelength λd --- 605 --- nm IF=20mA (Note 3) Spectrum Radiation Bandwidth Δλ --- 35 --- nm IF=20mA Forward Voltage VF 1.60 2.00 2.40 V IF=20mA Reverse Current IR --- --- 10 µA VR=5V Viewing Angle* Notes: 1. Luminous Intensity Measurement allowance is ± 10%. 2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. Spec No.: 463 Rev No: V.3 Date: Nov./28/2006 Approved: ZHOU Checked: Wu Drawn: Shu Lucky Light Electronics Co., Ltd. Page: 4 OF 7 http://www.luckylight.cn Luckylight Typical Electrical / Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Forward Current & Forward Voltage Ta=25℃ Ta=25℃ Forward Current IF (mA) 100 75 50 25 0 300 1000 400 500 600 700 Wavelength λp (nm) Luminous Intensity & Ambient Temperature 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta (℃) 50 40 30 20 10 0 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward Voltage VF (V) 800 Luminous Intensity & Forward Current Relative Luminous Intensity (%) Relative Luminous Intensity (%) Relative Luminous Intensity (%) Spectrum Distribution f=1KHz Duty=1/10 100 10 1 0 10 Forward Current Derating Curve Forward Current IF (mA) Ta=25℃ 1000 1 2 3 10 10 10 Forward Current IF (mA) Radiation Diagram 50 o 0 o 10 Ta=25℃ o 20 o 30 40 o 40 30 25 20 1.0 0.9 o 0.8 10 0 o 50 0.7 0 20 40 60 80 100 Ambient Temperature Ta (℃) 0.5 0.3 0.1 0 0.2 0.4 0.6 Spec No.: 463 Rev No: V.3 Date: Nov./28/2006 Approved: ZHOU Checked: Wu Drawn: Shu Lucky Light Electronics Co., Ltd. 60 o 70 o 80o 90 Page: 5 OF 7 http://www.luckylight.cn Luckylight Reliability Test Items And Conditions: The reliability of products shall be satisfied with items listed below: Confidence level: 90%. LTPD: 10%. 1) Test Items and Results: No. Test Item Test Hours/Cycles Test Conditions Sample Size Ac/Re 1 Resistance to Soldering Heat 6 Min Tsld=260±5℃, Min. 5sec 25pcs 0/1 2 Thermal Shock 300 Cycles 25pcs 0/1 3 Temperature Cycle 300 Cycles 25pcs 0/1 4 5 6 7 High Temperature Storage DC Operating Life Low Temperature Storage High Temperature/ High Humidity H: +100℃ 5min ∫ 10 sec L: -10℃ 5min H: +100℃ 15min ∫ 5min L: -40℃ 15min 1000Hrs. Temp: 100℃ 25pcs 0/1 1000Hrs. IF=20mA 25pcs 0/1 1000Hrs. Temp: -40℃ 25pcs 0/1 1000Hrs. 85℃/85%RH 25pcs 0/1 2) Criteria for Judging the Damage: Criteria for Judgment Item Symbol Test Conditions Min Max Forward Voltage VF IF=20mA --- F.V.*)×1.1 Reverse Current IR VR=5V --- F.V.*)×2.0 Luminous Intensity IV IF=20mA F.V.*)×0.7 --- *) F.V.: First Value. Spec No.: 463 Rev No: V.3 Date: Nov./28/2006 Approved: ZHOU Checked: Wu Drawn: Shu Lucky Light Electronics Co., Ltd. Page: 6 OF 7 http://www.luckylight.cn Luckylight Please read the following notes before using the product: 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 3. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 4. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 5. Caution in ESD Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded. Spec No.: 463 Rev No: V.3 Date: Nov./28/2006 Approved: ZHOU Checked: Wu Drawn: Shu Lucky Light Electronics Co., Ltd. Page: 7 OF 7 http://www.luckylight.cn