BYG20D-BYG20J Ultra Fast SMD Rectifiers VOLTAGE RANGE: 200 -- 600V CURRENT: 1.5 A Features SMA 2.6± 0.15 The plastic material carries U/L recognition 94V-0 5.1± 0.2 Mechanical Data 1.3± 0.2 ◇ Case: JEDEC SMA,molded plastic ◇ ◇ ◇ Polarity: Color band denotes cathode end Weight: 0.002 ounces, 0.064 grams Mounting position: Any 0.2± 0.05 0.203MAX ◇ 4.5± 0.1 1.5± 0.1 For surface mounted applications Glass passivated junction Low forward voltage drop High current capability Easily cleaned with Alcohol,Isopropnol and similar solvents 2.1± 0.2 ◇ ◇ ◇ ◇ ◇ Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase,half wave,50 Hz,resistive or inductive load. For capacitive load,derate by 20%. BYG20D BYG20G BYG20J UNITS Maximum recurrent peak reverse voltage VRRM 200 400 600 V Maximum RMS voltage VRMS 140 280 420 V Maximum DC blocking voltage VDC 200 V IF(AV) 400 1.5 600 Average forward rectified current IFSM 30 A VF 1.3 1.4 V IR 1.0 10 µA trr 75 ns Typical thermal resistance (Note2) RthJL 25 K/W Typical thermal resistance (Note3) RthJA 125 K/W Tj - 55 -- +150 ℃ TSTG - 55 -- +150 ℃ A Peak forward surge current 10 ms single half-sine-wave superimposed on rated load Maximum instantaneous @ 1.0 A forward voltage @ 1.5 A Maximum reverse current @T A=25℃ at rated DC blocking voltage @TA=100℃ Reverse recovery time (Note1) Operating temperature range Storage temperature range NOTE: 1. Reverse recovery test conditions: I F=0.5A,IR=1.0A,Irr=0.25A. 2. Thermal resistance from junction to lead. 3. Thermal resistance from junction to ambient.mounted on epoxy-glass hard tissue,50mm 2 35µm Cu. http://www.luguang.cn mail:[email protected] BYG20D-BYG20J Ultra Fast SMD Rectifiers Ratings AND Charactieristic Curves 1.5 Resistive or inductive Load 1.0 0.5 P.C.B.MOUNTED ON 0.27''X0.27''(7.0X7.0mm) COPPERPAND AREAS 0 50 60 70 80 90 100 110 120 130 140 150 160 FIG.2--PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,AMPERES AVERAGE FORWARD CURRENT,AMPERES FIG.1 -- FORWARD DERATING CURVE 30 O TL =100 C 10ms Single Half Sine-Wave (JEDEC Method) 24 18 12 6 0 1 10 LEAD TEMPERATURE NUMBER OF CYCLES AT 50 Hz 20 10 O 0.1 TJ=25 C Puise Width=300 S 1%DUTY CYCLE 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 FIG.4 -- TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT,MICROAMPERES INSTANTANEOUS FORWARD CURRENT,AMPERES FIG.3 --TYPICAL FORWARD CHARACTERISTIC 1 100 1.8 INSTANTANEOUS FORWARD VOLTAGE,VOLTS http://www.luguang.cn 100 10 TJ=100 C o 1 TJ=25 C o 0.1 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, mail:[email protected]