KBL401G-KBL407G Single Phase 4.0AMP. Glass Passivated Bridge Rectifiers KBL Features Glass passivated junction Ideal for printed circuit board Reliable low cost construction High surge current capability High temperature soldering guaranteed: o 260 C / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs. ( 2.3 Kg ) tension Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TA = 50 oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 2.0A @ 4.0A Symbol VRRM VRMS VDC KBL KBL KBL KBL KBL KBL KBL 401G 402G 403G 404G 405G 406G 407G 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 Units V V V I(AV) 4.0 A IFSM 150 A 1.0 V 1.1 10 uA Maximum DC Reverse Current @ TA=25 oC IR at Rated DC Blocking Voltage @ TA=125 oC 500 uA Typical Thermal Resistance (Note) RθJA 19 o C/W 2.4 RθJL o Operating Temperature Range TJ -55 to +150 C o Storage Temperature Range TSTG -55 to +150 C Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B. With 0.6” x 0.6”” (16mm x 16mm) Copper Pads. http://www.luguang.cn VF mail:[email protected] KBL401G-KBL407G Single Phase 4.0AMP. Glass Passivated Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES (KBL401G THRU KBL407G) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE FIG.2- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 100 4 3 2 1 0 0 150 50 100 o AMBIENT TEMPERATURE. ( C) INSTANTANEOUS REVERSE CURRENT. ( A) AVERAGE FORWARD CURRENT. (A) 5 TJ=125 0C 10 1 TJ=25 0C FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT 0.1 0 200 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.4- TYPICAL JUNCTION CAPACITANCE 150 1000 600 100 50 0 1 10 100 10 NUMBER OF CYCLES AT 60Hz 1000 FIG.5- TYPICAL FORWARD CHARACTERISTICS PER BRIDGE ELEMENT JUNCTION CAPACITANCE.(pF) PEAK FORWARD SURGE CURRENT. (A) 250 500 Tj=25 0C 400 300 200 100 0 0.1 0.5 1 2 5 10 20 50 100 200 500 800 INSTANTANEOUS FORWARD CURRENT. (A) REVERSE VOLTAGE. (V) 1 0.1 0 Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE 0.01 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE. (V) 1.6 http://www.luguang.cn mail:[email protected] Version: A06