SMBJ5913B-SMBJ5956B Zener Diodes VZ : 3.3 -- 200 V POWER DISSIPATION: 3.0 W SMB(DO-214AA) Features Complete voltage range 3.3 to 200 V ◇ Withstands large surge stresses ◇ Available on tape and reel ◇ High surge current rating 3.6± 0.3 ◇ 2.0± 0.15 4.7± 0.25 5.4± 0.2 Case:JEDEC SMB,molded plastic ◇ Polarity: Color band denotes cathods end ◇ Weight: 0.003 ounces, 0.093 gram 0.2± 0.05 1.3± 0.2 0.203MAX ◇ 2.3± 0.15 Mechanical Data Dimensions in millimeters Maximum Ratings and Thermal Characteristics (TA=25℃ unless otherwise noted) Symbol Value Unit Power dissipation at TL=75℃ Ptot 3.0 W Forward voltage @IF=200mA VF 1.5 V Junction temperature TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Parameter Storage temperature range http://www.luguang.cn mail:[email protected] SMBJ5913B-SMBJ5956B Zener Diodes ELECTRICAL CHARACTERISTICS Type number SMBJ5913B SMBJ5914B SMBJ5915B SMBJ5916B SMBJ5917B SMBJ5918B SMBJ5919B SMBJ5920B SMBJ5921B SMBJ5922B SMBJ5923B SMBJ5924B SMBJ5925B SMBJ5926B SMBJ5927B SMBJ5928B SMBJ5929B SMBJ5930B SMBJ5931B SMBJ5932B SMBJ5933B SMBJ5934B SMBJ5935B SMBJ5936B SMBJ5937B SMBJ5938B SMBJ5939B SMBJ5940B SMBJ5941B SMBJ5942B SMBJ5943B SMBJ5944B SMBJ5945B SMBJ5946B SMBJ5947B SMBJ5948B SMBJ5949B SMBJ5950B SMBJ5951B SMBJ5952B SMBJ5953B SMBJ5954B SMBJ5955B SMBJ5956B Device marking code 913B 914B 915B 916B 917B 918B 919B 920B 921B 922B 923B 924B 925B 926B 927B 928B 929B 930B 931B 932B 933B 934B 935B 936B 937B 938B 939B 940B 941B 942B 943B 944B 945B 946B 947B 948B 949B 950B 951B 952B 953B 954B 955B 956B Zener voltage (TA=25℃) Test current Dynamic impedance Knee current Knee impedance Reverse current Reverse voltage VZ IZT V mA 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 113.6 104.2 96.1 87.2 79.8 73.5 66.9 60.5 55.1 50 45.7 41.2 37.5 34.1 31.2 28.8 25 23.4 20.8 18.7 17 15.6 13.9 12.5 11.4 10.4 9.6 8.7 8.0 7.3 6.7 6.0 5.5 5.0 4.6 4.1 3.7 3.4 3.1 2.9 2.5 2.3 2.1 1.9 Max.DC current ZZT IZK ZZK IR(Max.) VR IZM Ω mA Ω µAdc V mA 10 9.0 7.5 6.0 5.0 4.0 2.0 2.0 2.5 3.0 3.5 4.0 4.5 5.5 6.5 7.0 9.0 10 12 14 17.5 19 23 28 33 38 45 53 67 70 86 100 120 140 160 200 250 300 380 450 600 700 900 1200 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 500 500 500 500 500 350 250 200 200 400 400 500 500 550 550 550 600 600 650 650 650 700 700 750 800 850 900 950 1000 1100 1300 1500 1700 2000 2500 3000 3100 4000 4500 5000 6000 6500 7000 8000 100 75 25 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.5 2.0 3.0 4.0 5.2 6.0 6.5 7.0 8.0 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.7 56 62.2 69.2 76 83.6 91.2 98.8 114 121.6 136.8 152 454 416 384 348 319 294 267 241 220 200 182 164 150 136 125 115 100 93 83 75 68 62 55 50 45 41 38 34 31 29 26 24 22 20 18 16 15 13 12 11 10 9 8 7 Notes:1.No suffix indicates a ±20% tolerance on nominal Vz.Suffix A denotes a ±10% tolerance,B denotes a ±5% tolerance, C denotes a ±2% tolerance, and D denotes a ±1% tolerance. 2.Zener voltage (Vz) is measured at TL=30℃. Voltage measurement to be performed 90 seconds after application of dc current. 3.The zener impedance is derived from the 60Hz ac voltage, which results when an ac current having an rms value equal to 10% of the dc zener current (I ZT or IZK) is superimposed on IZT or IZK.