Major League Electronics .100 cl Board Stacker Socket Strips C L Ordering Information BSSH-1 XX - J - XX - XX - XX - XXX - LF Pins Per Row 01 - 40 Lead Free Row Specification J = Jump Middle Row Polarized Position Leave blank if not needed If required, specify empty pin position, e.g. 012 for Pin 12 Pin Options Tail Length Body Height .090 2.29mm .290 7.37mm .435 11.05mm 12.47mm .490 .190 4.83mm .535 13.59mm .390 9.91mm .090 2.29mm .635 16.13mm .290 7.37mm .190 4.83mm .735 18.67mm 02 04 06 08 10 12 14 16 Lock Tight "LT" (Optional) Leave blank if not needed LT = With Plating Options G - 10µ Gold on Contact area/Flash on Tail T - Matte Tin all Over GT - 10µ Gold on Contact Area / Matte Tin on Tail H - 30µ Gold on Contact Area / Matte Tin on Tail F - Gold Flash over Entire Pin Specifications Insertion Depth: .145 (3,68mm) to .250 (6,35mm) Insertion Force - Per Contact - H Plating: 6oz. (1,67N) avg with .025 (0,64mm) sq. pin Withdrawal Force - Per Contact - H Plating: 5oz. (1,39N) avg with .025 (0,64mm) sq. pin Current Rating: 3.0 Ampere Insulation Resistance: 1000MΩ Min. Dielectric Withstanding: 600V AC Contact Resistance: 20 mΩ Max. Operating Temperature: -40°C to + 105°C Max. Process Temperature: Peak: 260°C up to 20 secs. Process: 230°C up to 60 secs. Wave: 260°C up to 6 secs. Manual Solder: 350°C up to 5 secs. Materials Contact Material: Phosphor Bronze Insulator Material: Nylon 6T Plating: Au or Sn over 50µ" (1,27) Ni Mates with: BSTC, BSTCM, BSTCR, BSTCRSM, BSTS, LBSTCM, LTSHCR, LTSHCRE, LTSHR, LTSHRE, LTSHSM, TSHC, Products cut to specific sizes are uncancellable/nonreturnable BSSH-1-J SERIES .100 cl Jump Middle Row Board Stacker Socket Strip TSHCR, TSHCRE, TSHCRSM, TSHR, TSHRE, TSHS, TSHSCM, TSHSM, ULTSHSM, ULTSHC, ULTHSCR Parts are subject to change without notice 15 JAN 07 4235 Earnings Way, New Albany, Indiana, 47150, USA 1-800-782-3486 (USA/Canada/Mexico) Tel: 812-944-7244 Fax: 812-944-7268 E-mail: [email protected] Web: www.mlelectronics.com