H-XPD-2W Series 5.2 KV ISOLATED 2W REGULATED SINGLE OUTPUT DIP24 Converters SELECTION GUIDE INPUT VOLTAGE (VDC) Nominal INPUT CURRENT NO LOAD INPUT CURRENT FULL LOAD OUTPUT VOLTAGE (VDC) OUTPUT CURRENT (max. mA) EFFICIENCY FULL LOAD (% TYP.) 5 50 615 5 400 65 H0509XPD-2W 5 47 545 9 200 66 H1205XPD-2W 12 40 252 5 400 66 H1209XPD-2W 12 38 220 9 200 68 H1212XPD-2W 12 35 245 12 167 68 H2405XPD-2W 24 16 128 5 400 65 Order code H0505XPD-2W FEATURES Technical Data Input ◆INPUT 5, 12 and 24 VDC Parameter ◆LOW OUTPUT RIPPLE & NOISE Conditions Data 5VDC 12VDC 24VDC 4.5~5.5V 10.8~13.2V 21.6~26.4V Uin DC Input Voltage fsw Switching Frequency 20KHZ typ η Efficiency 50% Input Filter Π-Filter ◆PI TYPE INPUT FILTER ◆OUTPUT 5, 9,12VDC ◆HIGH EFFICIENCY UP TO 78% ◆STANDARD 24 PIN DIP PACKAGE Electrical Specifications ◆Other specifications please enquire Typical at + 25° C, nominal input voltage, rated output current unless otherwise specified Input Specifications MODEL SELECTION ① ② ③ ④ ⑤ ⑥ (400) H 05 05 -X PD -2W 2W(400) Voltage range +/- 10 % Filter Pi Network Isolation Specifications Rated voltage ①Product Series ②Input Voltage ③Output Voltage ④Fixed Input ⑤DIP24 Package Style ⑥Rated Power(Output current) 5200 Vdc Leakage current 1 mA Resistance 109Ohm Capacitance 60 pF typ. Output Specifications APPLICATIONS Voltage accuracy +/- 2 %, max. Ripple and noise (at 20 MHz BW) 75 mV p-p, max. Short circuit protection Continuous , restart automatic Line voltage regulation +/- 0,5 % max. The H-XPD-2W series offer 2 watts of output power from a package Load voltage regulation +/- 0,5 % max. in an IC compatible 24 pin DIP configuration without derating to 71℃ Temperature coefficient +/- 0,02 % / ℃ ambient temperature. H-XPD-2W features 5200VDC of isolation General Specifications Efficiency voltage. Switching frequency 65 % to 85 % 125 KHz, typ. Environmental Specifications Operating temperature (ambient) -40℃ to +85℃ Storage temperature - 55℃ to + 125℃ Derating See graph Humidity Up to 90 %, non condensing Cooling Free air convection Physical Characteristics Dimensions MICRODC reserves the copyright Weight Case material http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 31,8 x 20,3x 10,2 mm 1,25 x 0,80 x 0,40 inches 12,2 g Non conductive black plastic Page 1 of 2 H-XPD-2W Series MECHANICAL DIMENSIONS RECOMMENDED FOOTPRINT Temperature derating curve TUBE OUTLINE DIMENSIONS Note: Unit :mm[inch] 0.50mm[ 0.020inch] General tolerances: ±0.50mm[ 0.50mm[±0.020inch] L=530mm[20.866inch] Tube Quantity: 19pcs L=220mm[8.661inch] Tube Quantity: 7pcs FOOTPRINT DETAILS http://www.microdc.cn Pin Connection Single 1、2 +V Input 3、10、11 Omitted 12 -V Output 13 +V Output 14、15、22 Omitted 23、24 -V Input Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 2