MH-XD-2W Series 5.2 KV ISOLATED 2W REGULATED SINGLE OUTPUT DIP24 Converters SELECTION GUIDE FEATURES Order code INPUT VOLTAGE (VDC) Nominal INPUT CURRENT NO LOAD INPUT CURRENT FULL LOAD OUTPUT VOLTAGE (VDC) OUTPUT CURRENT (max. mA) EFFICIENCY FULL LOAD (% TYP.) MH0505XD-2W 5 50 615 5 400 65 MH0509XD-2W 5 47 545 9 200 66 MH1205XD-2W 12 40 252 5 400 66 MH1209XD-2W 12 38 220 9 200 68 MH1212XD-2W 12 35 245 12 167 68 MH2405XD-2W 24 16 128 5 400 65 Technical Data Input Parameter INPUT 5, 12 and 24 VDC ◆ Conditions Data 5VDC 12VDC 24VDC 4.5~5.5V 10.8~13.2V 21.6~26.4V Uin DC Input Voltage fsw Switching Frequency 20KHZ typ η Efficiency 50% Input Filter Π-Filter LOW OUTPUT RIPPLE & NOISE ◆ PI TYPE INPUT FILTER ◆ OUTPUT 5, 9,12VDC ◆ HIGH EFFICIENCY UP TO 78% ◆ STANDARD 24 PIN DIP PACKAGE ◆ Electrical Specifications Other specifications please inquire ◆ Typical at + 25° C, nominal input voltage, rated output current unless otherwise specified Input Specifications MODEL SELECTION ① ② ③ ④ ⑤ (400)⑥ MH 05 05 -X D -2W 2W(400) Voltage range ±10 % Filter Pi Network Isolation Specifications ①Product Series ②Input Voltage ③Output Voltage ④Fixed Input ⑤DIP24 Package Style ⑥Rated Power(Output current) Rated voltage 5200 VDC Leakage current 1 mA Resistance 109Ohm Capacitance 60 pF typ. Output Specifications APPLICATIONS Voltage accuracy ±2%, max. The MH-XD-2W series offer 2 watts of output power from a package in an IC compatible 24 pin DIP configuration without derating to 71℃ ambient temperature. MH-XD-2W features 5200VDC of isolation voltage. Ripple and noise (at 20 MHz BW) 75 mV p-p, max. Short circuit protection Continuous , restart automatic Line voltage regulation ±0.5% max. Load voltage regulation ±0.5% max. Temperature coefficient ±0.02 % /℃ General Specifications Efficiency Switching frequency 65% to 85% 125 KHz, typ. Environmental Specifications Operating temperature (ambient) -40℃ to +85℃ Storage temperature - 55℃ to + 125℃ Derating See graph Humidity Up to 90 %, non condensing Cooling Free air convection Physical Characteristics Dimensions MICRODC RESERVES THE COPYRIGHT Weight Case material http://www.microdc.cn 31.8 x 20.3x 10.2 mm 1.25 x 0.80 x 0.40 inches 12.2 g Non conductive black plastic Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 2 MH-XD-2W Series MECHANICAL DIMENSIONS RECOMMENDED FOOTPRINT Temperature derating curve TUBE OUTLINE DIMENSIONS Note: Unit :mm[inch] 0.50mm[ 0.020inch] General tolerances: ±0.50mm[ 0.50mm[±0.020inch] L=530mm[20.866inch] Tube Quantity: 19pcs L=220mm[8.661inch] Tube Quantity: 7pcs FOOTPRINT DETAILS http://www.microdc.cn Pin Connection Single 1、2 +V Input 3、10、11 Omitted 12 -V Output 13 +V Output 14、15、22 Omitted 23、24 -V Input Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 2