1.6 GHz 30W Power Amplifier Module P9003-MB March 2010 - Rev 31-Mar-10 Features Peak-Envelope Power, 30W with Pulsed Signal 3W Linear Power 38 dB Gain 9V Positive Voltage Supply Fully Matched Internally Thermally Efficient for Higher MTTF Balanced Output Construction Shielded Metal Lid Low Harmonic Content Small Size, 40x36mm Surface Mount Package General Description The XP9003-MB is a highly linear 3-stage power amplifier module capable of 38 dB of gain, 30W of peak-power and is housed in a surface mount, thermally efficient package. XP9003-MB is fully matched internally and does not require external components. The module operates off a 9V voltage supply rail and is equipped with active bias circuit and control voltage allowing for current setting and minimizing variation over temperature and voltage. This product is designed specifically for satellite communication transmitters with high peak to average signals. XP9003-MB achieves excess of 35 dBm of linear power and less than -45 dBc adjacent channel power ratio when operated under a 16 QAM traffic signal with 6 dB peak to average ratio. Absolute Maximum Ratings Supply Voltage +9.0V RF Input Power +10 dBm Storage Temperature -55°C to 125 °C Junctions Temperature 175°C Operating Temperature -40°C to 85 °C Thermal Resistance 2.25°C/W Moisture Sensitivity Rating MSL 3 ESD (HBM) TBD Operating this device above any of the above parameters may cause permanent damage XP9003-MB: S-Parameters 50 40 30 20 (dB) 10 0 -10 -20 -30 -40 -50 0 0.5 1 1.5 2 Frequency (GHz) 2.5 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com 3 Page 1 of 5 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1.6 GHz 30W Power Amplifier Module P9003-MB March 2010 - Rev 31-Mar-10 Electrical Characteristics (T = 25°C) Unless otherwise specified, the following specifications are guaranteed at room temperature in a Mimix test fixture Parameter Symbol Min Operating Frequency Peak-Envelope Power Average Output Power Pout Pout Avr DC Power Consumption Pdc Efficiency Eff Power Gain Typ Max Unit Condition 1620 MHz 30 W 16 QAM, PAR = 6 dB, pulsed dBm 16 QAM, PAR = 6 dB, pulsed, ACPR -45 dBc 35 40 W @ Pout = +35 dBm 15 % @ Pout = +35 dBm Gp 38 dB Input Return Loss S11 -10 dB Input Impedance Zin 50 ohm Output Impedance Zout 50 ohm Voltage (stage 1) Vcc1 5 V Voltage (Stage 2) Vcc2 9 V Voltage (Stage 3) Vcc3 9 V Current (Stage 1) Icc1 300 mA Current (Stage 2) Icc2 600 mA @ Pout = +35 dBm, 16QAM Current (Stage 3) Icc3 2000 mA @ Pout = +35 dBm, 16QAM Reference Voltage Vref 9 V Reference Current Iref 50 mA Control Voltage Vcntrl 9 V Control Current Icntrl 2 mA Bias Circuit Voltage VCBias 5 V Bias Circuit Current ICBias 150 mA Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 2 of 5 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1.6 GHz 30W Power Amplifier Module P9003-MB March 2010 - Rev 31-Mar-10 Typical Performance (T = 25°C) ACPR Performance (16 QAM) ACP (dBc) 0 -10 ACP Lo (dBc) -20 ACP Hi (dBc) -30 -40 -50 -60 15 20 25 30 35 40 45 Pout (dBm) ACPR Performance (NADC, /4 QPSK) 0 ACP Lo (dBc) ACP (dBc) -10 ACP Hi (dBc) -20 -30 -40 -50 -60 15 20 25 30 35 40 45 Pout (dBm) Current (mA) Current Vs Pout: 16QAM, CW 3200 3000 2800 2600 2400 2200 2000 1800 1600 1400 1200 1000 800 600 400 200 Icc3 Icc2 Icc1 18 20 22 24 26 28 30 32 34 36 38 40 42 Output Power (dBm) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 5 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1.6 GHz 30W Power Amplifier Module P9003-MB March 2010 - Rev 31-Mar-10 Physical Dimensions and Pin Designation 6.132 3.708 2.050 34.66 All Dimensions are in mm Evaluation Board Components Layout Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 5 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 1.6 GHz 30W Power Amplifier Module P9003-MB March 2010 - Rev 31-Mar-10 Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a drop-in package and is not compatible with exposure to reflow soldering processes due to the nature of its internal construction. Mimix will only support hand-soldering processes for this device. Care should be taken not to apply heavy pressure to the top or tabs to avoid package damage. Care should be taken to ensure that there are no voids or gaps in the solder connections and base heat sink so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes. Ordering Information XP9003-MB-0N00 XP9003-MB-EV1 Description 1.6 GHz, 30W Power Amplifier Module Evaluation Board with SMA Connectors C a u t i o n : E S D S e n s i t i ve Appropriate precautions in handling, packaging and testing devices must be observed. Proper ESD procedures should be followed when handling this device. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 5 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.