MVKP, MVKL, and MVKV Series ¾ Industry Standard Package ¾ Wide Frequency Range ¾ RoHS Compliant Available ¾ Less than 1 pSec Jitter ELECTRICAL SPECIFICATIONS: LVDS Frequency Range Frequency Stability* Operating Temp.Range Storage Temp. Range Aging Logic “0” Logic “1” 1.43V typ 1.10V typ 50 mA max 60 mA max N/A +2.5VDC ± 5% +3.3VDC ± 5% +5.0VDC ± 5% Supply Voltage (Vdd) Supply Current Symmetry (50% of waveform) Rise / Fall Time (20% to 80%) Load Start Time Phase Jitter (12kHz to 20MHz) Tri-State Operation Vil LVPECL PECL 70.000MHz to 800.000MHZ (See Part Number Guide for Options) (See Part Number Guide for Options) -55°C to +125°C ±5 ppm / yr max Vdd – 1.620 VDC max Vdd – 1.620 VDC max Vdd- 1.025 vdc min Vdd- 1.025 vdc min 50 mA max N/A 60 mA max N/A N/A 140 mA max (See Part Number Guide for Options) 2nSec max 50 Ohms into Vdd-2.00 VDC 10mSec max Less than 1 pSec Vih = 70% of Vdd min to Enable Output = 30% max or grounded to Disable Output (High Impedance) * Inclusive of Temp., Load, Voltage and Aging +2.5VDC +3.3VDC +5.0VDC Control Voltage (Vc) 1.25VDC ±1.00VDC 1.65VDC ±1.50VDC N/A Pullability Linearity 1.25VDC ±1.00VDC 1.65VDC ±1.50VDC N/A (See Part Number Guide for Options) (See Part Number Guide for Options) N/A N/A 2.50VDC ±2.00VDC MECHANICAL DIMENSIONS: 10.16 [.400] 7.11 [.280] 6.35 [.250] 3 2 1 14.73 [.580] 4 5 6 5.08 [.200] 5.08 [.200] 1.02 [.040] 1.27 [.050] 1.52 [.060] 6.10 [.240] Dimension in Brackets are in Inches External Bypass Capacitor is Recommended 2.54 [.100] Pin Pin Pin Pin Pin Pin 1 2 3 4 5 6 Pin Connections Voltage Control N/C or Tri-state Case Ground Output Complimentary Output Suppy Voltage (Vdd) 2.54 [.100] Recommend Land Pattern PART NUMBER GUIDE: Frequency MVK Output P = PECL L = LVPECL V = LVDS Supply Voltage RoHS Compliant Blank = Not Compliant F = is Compliant 2 = +2.5 VDC 3 = +3.3 VDC 5 = +5.0 VDC Frequency Stability 020 = ±20 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Symmetry Blank = 40%/60% A = 45%/55% Pullability A = ±200 ppm min C = ±100 ppm min D = ±50 ppm min P = ±25 ppm min Linearity Blank = ±20% max X = ±5% max Y = ±10% max Z = ±15% max Packaging Blank = Bulk T = Tape and Reel *Option B (47.5/52.5%) Available up to 500MHZ only Please Consult with MMD Sales Deparment for any other Parameters or Options MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Specifications subject to change without notice Revision MVKP020508G