NEC PFB8553200D277MB

Vol.
02
New High Speed Decoupling Device
®
Proadlizer PF/B Series
APPLICATION
• High speed and high power CPU decoupling
• EMI solution for 10 MHz range or above
• High switching frequency DC/DC converter output
capacitor
FEATURES
• Excellent noise absorption performance at GHz
frequency
• High Capacitance and very low ESR based on
our Conductive Polymer technology
• Reduction of passive components for decoupling circuit
DIMENSIONS [mm]
PERFORMANCE
1
Test Item
Performance
Operating
Temperature
55∼+125
Test Condition
L2
Z2
L1
Z1
2.5V,4V
2
Rated Voltage
3
Capacitance
22µF∼100µF
4
Capacitance
Tolerance
±20%
120Hz
5
LC
Refer Rating table
Applied Rating Voltage,5min
6
Dissipation
Factor
Refer Rating table
120Hz
7
ESR
Refer Rating table
100kHz
8
Surge Voltage
Capacitance Change:Within ±20% of Initial specification
LC:Lower than initial specification
Dissipation Factor:Lower than 2times initial specification
ESR:Lower than 2times initial specification
Applied 115% of Rating
Voltage at 125 1000 cycles
9
Temperature
Stability
Z1
120Hz
W1
No
OE 107
H
B8J00001
−55℃
125℃
Capacitance
Change
Within 0% to -20%
Within +50% to 0%
LC
Lower than initial
specification
Lower than 10 times
initial specification
tanδ
Lower than initial
specification
Lower than 1.5times
initial specification
ESR
Lower than initial
specification
Lower than 1.5times
initial specification
Case Code
L1
L2
W1
H
Z1
Z2
855320
8.5±0.2
8.2±0.2
5.3±0.2
2.0Max
1.2±0.2
4.6±0.2
LAYOUT LAND PATTERN (Tentative)
10
Temperature
Cycling
Capacitance Change:Within ±20% of initial specification
LC:Lower than initial specification
Dissipation Factor:Lower than 2times initial specification
ESR:Lower than 2times initial specification
-55 to 125 5cycles
11
Resistance to
Soldering Heat
Capacitance Change:Within ±20% of initial specification
LC:Lower than initial specification
Dissipation Factor:Lower than initial specification
ESR:Lower than initial specification
Reflow soldering
240 ,10sec. Peak
12
Dump Heat
Capacitance Change:Within +30% to –20%
of initial specification
LC:Lower than initial specification
Dissipation Factor:Lower than 2times initial specification
ESR:Lower than 2times initial specification
65 90 to 95%RH
500hour
13
Endurance
Capacitance Change:Within ±20% of initial specification
LC:Lower than initial specification
Dissipation Factor:Lower than 2times initial specification
ESR:Lower than 2times initial specification
125 Applied Rating Voltage
1000hour
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9653PFBVOL02E0912E1
Proadlizer ® PF/B Series
PART NUMBER SYSTEM
MARKING
PFB 855320 0E 336 M B
Tape & Reel Carrier
0E 107
Capacitance tolerance
(M: ±20%)
Capacitance (336 : 33µF)
First two digits represent significant figures.
Third digit specifies number of zeros to follow.
Rated voltage Capacitance
Rated voltage (0E: 2.5V, 0G: 4V)
Case code
PFB Series
RATINGS (Initial specification)
Rated
Voltage
(V)
2.0
2.5
2.5
4
4
Capacitance
(µF)
Dissipation
Factor
(%)
LC
(µA)
5
5
5
5
5
270
41.3
125
44
94
270
33
100
22
47
ESR
(mΩ)
at 100kHz
50
50
30
50
30
Case
Code
Part Number
855320
855320
855320
855320
855320
PFB8553200D277MB
PFB8553200E336MB
PFB8553200E107MB
PFB8553200G226MB
PFB8553200G476MB
★
★Under development
PERFORMANCE (reference)
NOTE (reference)
ex.1 Filter circuit design
0
V in
−20
S21 Magnitude(dB)
ex.2 Decoupling circuit design
Proadlizer
2.5V/33μF
Proadlizer
V out
V in
Mounting
plane
Vcc Layer
−40
GND Layer
Back surface
−60
−80
−100
0.1
1
10
100
1000
Frequency(MHz)
ex.1 An effecting filtering performance can be achieved by
separating input and output in the VCC layer.
ex.2 An effective decoupling performance can be achieved
by not separating Vcc layer. This method also makes
surface mounting of loads(CPU etc.) efficient.
2nd Sales Unit
NEC TOKIN Shanghai Co.,Ltd.
Chiyoda First Bldg., 8-1, Nishi-Kanda 3-chome,Chiyoda-ku, Tokyo 101-8362, Japan
Room 301-302, Metro Plaza, No.555 Loushanguan Road, Changning District, Shanghai, China 200051
Phone: 86-21-6228-0606 Fax: 86-21-6228-6862
1st Overseas Sales Dept.
Phone: 81-3-3515-9222 Fax: 81-3-3515-9223
NEC TOKIN Singapore Pte Ltd.
2nd Overseas Sales Dept.
180 Cecil Street, #14-02/03 Bangkok Bank Building, Singapore 069546
Phone: 65-6223-7076 Fax: 65-6223-6093
Phone: 81-3-3515-9224 Fax: 81-3-3515-9223
3rd Overseas Sales Dept.
Phone: 81-3-3515-9228 Fax: 81-3-3515-9223
NEC TOKIN Korea Co., Ltd.
518, Korea City AIR-Terminal B/D, 159-6,Samsung-dong, Kangnam-gu, Seoul 135-728, Korea
Phone: 82-2-551-3651 Fax: 82-2-551-3650
NEC TOKIN America Inc.
(Headquarters & Western Area Sales)
2460 North First Street, Suite 220, San Jose,California 95131, U.S.A.
Phone: 1-408-324-1790 Fax: 1-408-324-1497
Chicago Branch (Northeast Sales Office)
1600 Golf Road, Corporate Center-Suite 1228,Rolling Meadows, Illinois 60008 U.S.A.
Phone: 1-847-981-5047 Fax: 1-847-981-5051
Austin Branch (Southeast Sales Office)
11782 Jollyville Road, Suite 208, Austin, Texas 78759, U.S.A.
Phone: 1-512-219-4040 Fax: 1-512-219-4007
V out
NEC TOKIN Taiwan Co., Ltd.
Room 411, No.9, Lane 3, Minsheng W.Road, Taipei 104, Taiwan
Phone: 886-2-2521-3998 Fax: 886-2-2521-3993
NEC TOKIN Europe GmbH
Hellersbergstrasse 14, D-41460 Neuss, Germany
Phone: 49-2131-1866-0 Fax: 49-2131-1866-18
Munich Office
Sigmund-Riefler-Bogen 8, D-81829 Muenchen, Germany
Phone: 49-89-944-197-0 Fax: 49-89-944-197-10
France Branch
9, Rue Paul Dautier, 78142 Velizy-Villacoublay, France
Phone: 33-1-39-452011 Fax: 33-1-39-451209
Sweden Representative Office
Solkraftsvaegen 25, 13570 Stockholm, Sweden
Phone: 46-8-712-91-05 Fax: 46-8-712-91-10
NEC TOKIN Hong Kong Ltd.
Unit Nos. 1512-1517, Level 15, Tower Ⅱ , Grand Central Plaza,
138 Shatin Rural Committee Road, Shatin, New Territories, Hong Kong
Phone: 852-2730-0028 Fax: 852-2375-2508
© 2009 NEC TOKIN Corporation
For inquiry,Please call Sales Promotion Department(Japan)
Technical support
NEC TOKIN Global Marketing Division(Japan)
Phone: 81-3-3515-9220 Fax: 81-3-3515-9223
Phone: 81-3-3515-9264 Fax: 81-3-3515-9263
Precautions
• The names of the products and the specifications in this catalog are subject to change without notice for the sake of improvement. The manufacturer also reserves the right to discontinue any of
these products. At the time of delivery, please ask for specifications sheets to check the contents in order to use the products properly and safely.
• Descriptions in this catalog regarding product characteristics and quality are based solely on discrete components. When using these components, be sure to check the specifications with the
component in question mounted on the products.
• The manufacturer’s warranty will not cover any disadvantage or damage caused by improper use of the products that deviates from the characteristics, specifications, or conditions for use
described in this catalog.
• The products in this catalog are intended for use in ordinary electronic products. If any of these products are to be used in special applications requiring extremely high reliability, such as in aviation
equipment and nuclear power controllers where product defects might pose a safety risk, please consult your NEC TOKIN sales representatives.
• Though the manufacturer has taken all possible precautions to ensure the quality and reliability of its products, improper use of products may result in bodily injury, fire, or similar accident. If you
have any questions regarding the use of the products in question, please consult your NEC TOKIN sales representatives.
• Please be advised that the manufacturer accepts no responsibility for any infraction by users of the manufacturer’s products on third party patents or industrial copyrights. The manufacturer is
responsible only when such infractions are attributable to the structural design of the product and its manufacturing process.
• Export Control
For customers outside Japan
NEC TOKIN products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons(nuclear weapons,
chemical or biological weapons, or missiles), or any other weapons.
For customers in Japan
For products which are controlled items subject to the, “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export.
• This catalog is current as of October 2009.
http://www.nec-tokin.com
9653PFBVOL02E0912E1
Printed in Japan
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
9653PFBVOL02E0912E1