TNC Male to TNC Male Precision Cable 72 Inch Length Using 150 Series Coax, RoHS TECHNICAL DATA SHEET PE35423-72 TNC Male to TNC Male Precision Cable 72 Inch Length Using 150 Series Coax, RoHS Configuration Connector 1 Connector 2 Cable Type TNC Male TNC Male 150 Series Electrical Specifications Frequency Range, GHz Impedance, Ohms Maximum VSWR Velocity of Propagation, % RF Shielding, dB Maximum Operating Voltage, Vrms DC to 18 50 1.4:1 69.5 90 1,900 Electrical Specification Notes: Short lengths up to 24” long may exhibit VSWR measurements up to 9% higher. Mechanical Specifications Cable Assembly Cable Type 150 Series Temperature Temperature Operating Range, deg C -50 to +205 Size Length, in [cm] 72 [182.88] One Time Minimum Bend Radius, in [mm] 1 [25.4] . Cable Center Conductor Type Cable Inner Conductor No of Shields Dielectric Type Jacket Material Jacket Diameter, in [mm] Solid Copper Clad Steel, Silver 1 PTFE FEP 0.15 [3.81] Connector 1 Type Configuration Inner Conductor Material and Plating Coupling Nut Material and Plating Hex Size, in. Torque, in-lbs [Nm] TNC Male Straight Copper Clad Steel, Silver Passivated Stainless Steel 5/8 14 [1.58] Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: TNC Male to TNC Male Precision Cable 72 Inch Length Using 150 Series Coax, RoHS PE35423-72 PE35423-72 REV 1 TNC Male to TNC Male Precision Cable 72 Inch Length Using 150 Series Coax, RoHS TECHNICAL DATA SHEET PE35423-72 Body Material and Plating Dielectric Type Passivated Stainless Steel PTFE Connector 2 Type Configuration Inner Conductor Material and Plating Coupling Nut Material and Plating Hex Size, in. Torque, in-lbs [Nm] Body Material and Plating Dielectric Type TNC Male Straight Copper Clad Steel, Silver Passivated Stainless Steel 5/8 14 [1.58] Passivated Stainless Steel PTFE Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level TNC Male to TNC Male Precision Cable 72 Inch Length Using 150 Series Coax, RoHS from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: TNC Male to TNC Male Precision Cable 72 Inch Length Using 150 Series Coax, RoHS PE35423-72 URL: http://www.pasternack.com/tnc-male-tnc-male-150-series-cable-assembly-pe35423-72-p.aspx PE35423-72 REV 2 © 2013 Pasternack Enterprises All Rights Reserved Length In Inches 12'' 24" 36" 48" 60" Custom Length FSCM NO. 53919 PE35423 DWG TITLE Part # Ext. Part Number Configuration Examples -12 yy -24 xx uu PE3 zzz PE3000LF-100 -36 PE3000-100 00 - 99999 CM = Centimeters PE3000LF-100CM -48 LF = RoHS Compliant < Blank > = Inches -60 < Blank > = Standard PE3000-100CM Length -xx Note: LF applies only to RF cables PE35423-72 REV How To Order TNC MALE Length In Centimeters 25Cm 50Cm 75Cm 100Cm 125Cm Custom Length CAD FILE 030813 SCALE N/A SIZE A 2233 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. LENGTH TOLERANCE IS ± 1.5% OR 3/8", WHICHEVER IS GREATER. Part # Ext. -25CM -50CM -75CM -100CM -125CM -xxCM TNC MALE TNC Male to TNC Male Precision Cable 72 Inch Length Using 150 Series Coax, RoHS PE35423-72 CAD Drawing 3