PO Box 16759 Irvine, CA 92623-6759 Toll Free: (866) 727-8376 Direct: +1 (949) 261-1920 FAX: +1 (949) 261-7451 Email: [email protected] 18 GHz Flexible Cable Assemblies Product Features • • • • 18 GHz SMA, N & TNC Connectors Reinforced coaxial interface 1 inch bend radius Double Shielded coax cable. Description The 18 GHz Flexible Cable Assembly series offer precision N & TNC connectors that operate to 18 GHz, and an SMA connector with excellent performance to 26.5 GHz. The coax provides excellent isolation and low loss performance to 26.5 GHz. (1) PE33232 – N Male to N Male PE33231 – SMA Male to N Male PE35952 – N Male to N Female Bulkhead PE35954 – SMA Male to N Female Bulkhead PE35423 – TNC Male to TNC Male PE35419 – SMA Male to TNC Male Pasternack reserves the right to change specifications or information without notice. www.pasternack.com 1 of 2 PO Box 16759 Irvine, CA 92623-6759 Toll Free: (866) 727-8376 Direct: +1 (949) 261-1920 FAX: +1 (949) 261-7451 Email: [email protected] Electrical Specifications Parameter Impedance Frequency Insertion Loss Return Loss Cutoff Frequency Max Operating Voltage Nominal Capacitance Velocity of Propagation RF Shielding (1) Units ohms GHz dB dB GHz V pF / ft. % dB Value 50Ω 18 <0.7 >15dB 35 1900 29.4 69.5 >90 Mechanical Specifications Parameter Minimum bend radius Operating Temperature Inner Conductor diameter Dielectric diameter Jacket diameter Units in. F in. in. in. 18 GHz Flexible Cable Assemblies Description At 18 GHz RMS (1) Value 1 -55º to +400º 0.036 0.116 0.150 Description Silver plated Cu Clad Steel PTFE FEP Standard Lengths P/N PE33232 PE33231 PE35952 PE35954 PE35423 PE35419 Conn 1 N - Male SMA - Male N - Male SMA - Male TNC - Male SMA - Male Conn 2 N - Male N - Male N - Blkhd Female N - Blkhd Female TNC - Male TNC - Male 6 X X X X X X 12 X X X X X X 18 X X X X X X 24 X X X X X X Length (inches) 30 36 48 60 X X X X X X X X X X X X X X X X X X X X X X X X 72 X X X X X X 120 Standard Lengths Orders placed before 3:30 PM PST are available for same day shipping, subject to quantity limitations at time of purchase. Custom Lengths Custom lengths and connector configurations are available. Orders placed before 3:30 PM PST will be shipped within 3 business days, subject to material limitations at time of purchase. Creating a Cable Assembly P/N The cable assembly length is identified by its length in inches following the part number dash (-). Part Number – length in inches PExxxxx – xx Example The following example is a 96 inch PE33232 cable assembly. PE33232-96 (1) Pasternack reserves the right to change specifications or information without notice. www.pasternack.com 2 of 2