75 Ohm SMB Jack Connector Solder Attachment Thru Hole PCB, .200 inch x .067 inch Hole Spacing TECHNICAL DATA SHEET PE4110 75 Ohm SMB Jack Connector Solder Attachment Thru Hole PCB, .200 inch x .067 inch Hole Spacing Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style SMB Jack Thru Hole Solder Straight Electrical Specifications Frequency Range, GHz Impedance, Ohms Maximum Operating Voltage, Volts Dielectric Withstanding Voltage, Vrms DC to 2 75 250 2,000 Frequency 1 Frequency, GHz Insertion Loss, dB DC to 1.5 0.3 Mechanical Specifications Temperature Operating Range, deg C -65 to +165 Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 0.45 [11.43] 0.38 [10] 0.38 [9.65] Weight, lbs [g] 0.004 [1.81] Connector Type Contact Material and Plating Contact Plating Specification Body Material and Plating Body Plating Specification Dielectric Type SMB Jack Beryllium Copper, Gold MIL-PRF-39012 Brass, Gold MIL-PRF-39012 Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm SMB Jack Connector Solder Attachment Thru Hole PCB, .200 inch x .067 inch Hole Spacing PE4110 PE4110 REV 1 75 Ohm SMB Jack Connector Solder Attachment Thru Hole PCB, .200 inch x .067 inch Hole Spacing TECHNICAL DATA SHEET PE4110 75 Ohm SMB Jack Connector Solder Attachment Thru Hole PCB, .200 inch x .067 inch Hole Spacing from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm SMB Jack Connector Solder Attachment Thru Hole PCB, .200 inch x .067 inch Hole Spacing PE4110 URL: http://www.pasternack.com/smb-jack-standard-thru-hole-pcb-connector-pe4110-p.aspx PE4110 REV 2 © 2013 Pasternack Enterprises All Rights Reserved PE4110 REV REV. A CAD FILE 072911 SCALE N/A SIZE A 2231 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4110 DWG TITLE 75 Ohm SMB Jack Connector Solder Attachment Thru Hole PCB, .200 inch x .067 inch Hole Spacing PE4110 CAD Drawing 3