75 Ohm SMC Jack Bulkhead Connector Crimp/Solder Attachment For RG180, RG195, .177 inch D Hole TECHNICAL DATA SHEET PE4166 75 Ohm SMC Jack Bulkhead Connector Crimp/Solder Attachment For RG180, RG195, .177 inch D Hole Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style Mount Method SMC Jack RG180,RG195 Crimp/Solder Straight Bulkhead Electrical Specifications Impedance, Ohms 75 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 1.152 [29.26] 0.344 [8.74] Weight, lbs [g] 0.004 [1.81] Connector Type Contact Material and Plating Body Material and Plating Dielectric Type SMC Jack Gold Brass, Nickel PTFE . Compliance Certifications (visit www.Pasternack.com for current document) Plotted and Other Data Notes: Values at 25 °C, sea level 75 Ohm SMC Jack Bulkhead Connector Crimp/Solder Attachment For RG180, RG195, .177 inch D Hole from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm SMC Jack Bulkhead Connector Crimp/Solder Attachment For RG180, RG195, .177 inch D Hole PE4166 URL: http://www.pasternack.com/smc-jack-standard-rg180-rg195-connector-pe4166-p.aspx PE4166 REV 01 1 © 2013 Pasternack Enterprises All Rights Reserved PE4166 REV 01 CONTACT: SOLDER FERRULE: .178" HEX CRIMP TOOL CRIMP SIZE REQUIRED 4. THREAD CRIMP NUT (2) INTO BODY & TIGHTEN. CRIMP FERRULE (1). 3. SOLDER CONTACT (3) TO CENTER CONDUCTOR. 2. ADD CRIMP NUT (2) SLIDING EXTENSION BETWEEN BRAID & DIELECTRIC. SLIDE FERRULE (1) OVER BRAID & AGAINST CRIMP 1. STRIP CABLE AS SHOWN & SLIDE FERRULE (1) ONTO CABLE. TIN CENTER CONDUCTOR. ASSEMBLY PROCEDURES REV. - CAD FILE 042309 SCALE N/A SIZE A 147 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4166 DWG TITLE 75 Ohm SMC Jack Bulkhead Connector Crimp/Solder Attachment For RG180, RG195, .177 inch D Hole PE4166 CAD Drawing 2