75 Ohm SMB Jack Bulkhead Connector Solder Attachment Solder Cup Terminal, .295 inch D Hole TECHNICAL DATA SHEET PE4172 75 Ohm SMB Jack Bulkhead Connector Solder Attachment Solder Cup Terminal, .295 inch D Hole Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style Mount Method SMB Jack Solder Cup Solder Straight Bulkhead Electrical Specifications Impedance, Ohms 75 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 0.61 [15.49] 0.375 [9.53] Weight, lbs [g] 0.006 [2.72] Connector Type Contact Material and Plating Body Material and Plating Dielectric Type SMB Jack Gold Brass, Nickel PTFE . Compliance Certifications (visit www.Pasternack.com for current document) Plotted and Other Data Notes: Values at 25 °C, sea level 75 Ohm SMB Jack Bulkhead Connector Solder Attachment Solder Cup Terminal, .295 inch D Hole from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm SMB Jack Bulkhead Connector Solder Attachment Solder Cup Terminal, .295 inch D Hole PE4172 URL: http://www.pasternack.com/smb-jack-standard-solder-cup-terminal-connector-pe4172-p.aspx PE4172 REV 1