BNC Twinax Jack Right Angle Connector Solder Attachment Thru Hole PCB, .687 inch x .500 inch Hole Spacing TECHNICAL DATA SHEET PE44116 BNC Twinax Jack Right Angle Connector Solder Attachment Thru Hole PCB, .687 inch x .500 inch Hole Spacing Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style BNC Twinax Jack Thru Hole Solder Right Angle Electrical Specifications Impedance, Ohms 78 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 1.06 [26.92] 0.688 [17] 0.785 [19.94] Weight, lbs [g] 0.027 [12.25] Connector Type Contact Material and Plating Body Material and Plating Dielectric Type BNC Twinax Jack Silver Brass, Nickel PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level BNC Twinax Jack Right Angle Connector Solder Attachment Thru Hole PCB, .687 inch x .500 inch Hole Spacing from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: BNC Twinax Jack Right Angle Connector Solder Attachment Thru Hole PCB, .687 inch x .500 inch Hole Spacing PE44116 URL: http://www.pasternack.com/bnc-twinax-jack-standard-thru-hole-pcb-connector-pe44116-p.aspx PE44116 REV 1 © 2013 Pasternack Enterprises All Rights Reserved PE44116 REV REV. B CAD FILE 062111 SCALE N/A SIZE A 2231 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE44116 DWG TITLE Male Pin Female Pin BNC Twinax Jack Right Angle Connector Solder Attachment Thru Hole PCB, .687 inch x .500 inch Hole Spacing PE44116 CAD Drawing 2