PASTERNACK PE44132

SMB Jack Connector Solder Attachment 0.042 inch
End Launch PCB, .030 inch Diameter
TECHNICAL DATA SHEET
PE44132
SMB Jack Connector Solder Attachment 0.042 inch End Launch PCB, .030 inch Diameter
Configuration
Connector
Connector Specification
Connector Interface Type
Cable Attachment Method (Shield/Contact)
Body Style
Electrical Specifications
Frequency Range, GHz
Impedance, Ohms
Maximum Operating Voltage, Volts
Dielectric Withstanding Voltage, Vrms
SMB Jack
MIL-C-39012
0.042 inch End Launch
Solder
Straight
DC to 4
50
335
1,000
Mechanical Specifications
Temperature
Operating Range, deg C
-65 to +165
Size
Length, in [mm]
Width/Dia., in [mm]
Height, in [mm]
0.562 [14.27]
0.375 [9.53]
0.312 [7.92]
Weight, lbs [g]
0.004 [1.81]
Connector
Type
Mating Cycles
Contact Material and Plating Contact Plating Specification
Body Material and Plating
Body Plating Specification
Dielectric Type SMB Jack
500
Brass, Gold
30µ in. minimum
Brass, Gold
10µ in. minimum
Teflon
.
Compliance Certifications (visit www.Pasternack.com for current document)
RoHS Compliant
Yes
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: SMB Jack Connector Solder Attachment 0.042 inch End Launch PCB, .030 inch Diameter
PE44132
PE44132 REV 01
1
SMB Jack Connector Solder Attachment 0.042 inch
End Launch PCB, .030 inch Diameter
TECHNICAL DATA SHEET
PE44132
Plotted and Other Data
Notes:
Values at 25 °C, sea level
SMB Jack Connector Solder Attachment 0.042 inch End Launch PCB, .030 inch Diameter from Pasternack Enterprises
has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99%
availability and are part of the broadest selection in the industry.
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: SMB Jack Connector Solder Attachment 0.042 inch End Launch PCB, .030 inch Diameter PE44132
URL: http://www.pasternack.com/smb-jack-standard-0.042-end-launch-connector-pe44132-p.aspx
PE44132 REV 01
2
© 2013 Pasternack Enterprises All Rights Reserved
PE44132 REV 01
FSCM NO. 53919
PE44132
DWG TITLE
CAD FILE
062702
SCALE N/A
SIZE A
127
NOTES:
1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL.
2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME.
3. DIMENSIONS ARE IN INCHES [mm].
4. FITS MIL-C-17 AND EQUIVALENT CABLES.
SMB Jack Connector Solder Attachment 0.042 inch End Launch PCB, .030 inch Diameter
PE44132 CAD Drawing
3