D-Sub Plug Right Angle Contact Crimp/Solder Attachment For RG174, RG316, RG187, RG188 TECHNICAL DATA SHEET PE4825 D-Sub Plug Right Angle Contact Crimp/Solder Attachment For RG174, RG316, RG187, RG188 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style D-Sub Plug RG174,RG316,RG187,RG188 Crimp/Solder Right Angle Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 0.735 [18.67] 0.22 [5.59] 0.605 [15.37] Weight, lbs [g] 0.006 [2.72] Connector Type Contact Material and Plating Body Material and Plating Dielectric Type D-Sub Plug Gold Brass, Gold PTFE . Compliance Certifications (visit www.Pasternack.com for current document) Plotted and Other Data Notes: Values at 25 °C, sea level D-Sub Plug Right Angle Contact Crimp/Solder Attachment For RG174, RG316, RG187, RG188 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: D-Sub Plug Right Angle Contact Crimp/Solder Attachment For RG174, RG316, RG187, RG188 PE4825 URL: http://www.pasternack.com/d-sub-plug-standard-rg174-rg316-rg187-rg188-connector-pe4825-p.aspx PE4825 REV 01 1 © 2013 Pasternack Enterprises All Rights Reserved PE4825 REV 01 INSTALL CABLE INTO BODY OF CONNECTOR AND SOFT SOLDER CENTER CONDUCTOR IN PLACE. CRIMP FERRULE & SOLDER CAP IN PLACE. 2. 3. FERRULE: .128" HEX CRIMP TOOL CRIMP SIZE REQUIRED STRIP CABLE AS SHOWN. 1. ASSEMBLY PROCEDURES FSCM NO. 53919 PE4825 DWG TITLE CAD FILE 061002 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. D-Sub Plug Right Angle Contact Crimp/Solder Attachment For RG174, RG316, RG187, RG188 PE4825 CAD Drawing 2