TNC Male Connector Solder Attachment For PE-SR401AL, PE-SR401FL, RG401 TECHNICAL DATA SHEET PE4909 TNC Male Connector Solder Attachment For PE-SR401AL, PE-SR401FL, RG401 Configuration Connector Connector Specification Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style Electrical Specifications Impedance, Ohms TNC Male MIL-C-39012 PE-SR401AL,PE-SR401FL,RG401 Solder/Solder Straight 50 Mechanical Specifications Temperature Operating Range, deg C -65 to +165 Size Length, in [mm] Width/Dia., in [mm] 0.9 [22.86] 0.59 [14.99] Weight, lbs [g] 0.034 [15.42] Connector Type Contact Material and Plating Contact Plating Specification Coupling Nut Material and Plating Body Material and Plating Body Plating Specification Dielectric Type TNC Male Gold MIL-G-45204 Brass, Nickel Brass, Gold MIL-G-45204 Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: TNC Male Connector Solder Attachment For PE-SR401AL, PE-SR401FL, RG401 PE4909 PE4909 REV 01 1 TNC Male Connector Solder Attachment For PE-SR401AL, PE-SR401FL, RG401 TECHNICAL DATA SHEET PE4909 Plotted and Other Data Notes: Values at 25 °C, sea level TNC Male Connector Solder Attachment For PE-SR401AL, PE-SR401FL, RG401 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: TNC Male Connector Solder Attachment For PE-SR401AL, PE-SR401FL, RG401 PE4909 URL: http://www.pasternack.com/tnc-male-standard-pe-sr401al-pe-sr401fl-rg401-connector-pe4909-p.aspx PE4909 REV 01 2 © 2013 Pasternack Enterprises All Rights Reserved PE4909 REV 01 STRIP CABLE AS SHOWN DO NOT NICK CENTER CONDUCTOR. SOLDER CONTACT TO CENTER CONDUCTOR. INSERT CABLE INTO BODY UNTIL OUTER CONDUCTOR BOTTOMS OUT WITH BODY SHOULDER. SOLDER OUTER CONDUCTOR TO BODY. 1. 2. 3. ASSEMBLY PROCEDURES FSCM NO. 53919 PE4909 DWG TITLE CAD FILE 062402 SCALE N/A SIZE A XXXX NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. TNC Male Connector Solder Attachment For PE-SR401AL, PE-SR401FL, RG401 PE4909 CAD Drawing 3