3.5mm Female Connector Clamp/Solder Attachment For PE-SR402AL, PE-SR402FL, RG402 TECHNICAL DATA SHEET PE4983 3.5mm Female Connector Clamp/Solder Attachment For PE-SR402AL, PE-SR402FL, RG402 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style 3.5mm Female PE-SR402AL,PE-SR402FL,RG402 Clamp/Solder Straight Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 0.905 [22.99] 0.375 [9.53] Weight, lbs [g] 0.02 [9.07] Connector Type Contact Material and Plating Body Material and Plating Dielectric Type 3.5mm Female Gold Passivated Stainless Steel Noryl . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level 3.5mm Female Connector Clamp/Solder Attachment For PE-SR402AL, PE-SR402FL, RG402 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 3.5mm Female Connector Clamp/Solder Attachment For PE-SR402AL, PE-SR402FL, RG402 PE4983 URL: http://www.pasternack.com/3.5mm-female-standard-pe-sr402al-pe-sr402fl-rg402-connector-pe4983-p.aspx PE4983 REV 01 1 © 2013 Pasternack Enterprises All Rights Reserved PE4983 REV 01 3. SCREW ASSEMBLY INTO BODY & TIGHTEN. 2. INSERT CABLE THROUGH CLAMP NUT AS SHOWN IN (B). SOLDER OUTER CONDUCTOR TO CLAMP NUT. 1. STRIP CABLE AS SHOWN IN (A). DO NOT NICK CENTER CONDUCTOR. ASSEMBLY PROCEDURES REV. A CAD FILE 111803 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4983 DWG TITLE 3.5mm Female Connector Clamp/Solder Attachment For PE-SR402AL, PE-SR402FL, RG402 PE4983 CAD Drawing 2