50 Ohm TNC DC Block Operating From 10 MHz to 18 GHz TECHNICAL DATA SHEET PE8221 50 Ohm TNC DC Block Operating From 10 MHz to 18 GHz Configuration Design Body Style Impedance Connector 1 Connector Specification 1 Connector 2 Connector Specification 2 Inner/Outer DC Block Straight 50 Ohms TNC Male MIL-STD-348 TNC Female MIL-STD-348 Electrical Specifications Frequency Range, GHz Impedance, Ohms Maximum VSWR Maximum Insertion Loss, dB Maximum Operating Voltage, Vrms 0.01 to 18 50 1.35:1 0.75 200 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 2.07 [52.58] 0.59 [14.99] Connector 1 Type TNC Male Connector 2 Type TNC Female . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 50 Ohm TNC DC Block Operating From 10 MHz to 18 GHz PE8221 PE8221 REV 1 50 Ohm TNC DC Block Operating From 10 MHz to 18 GHz TECHNICAL DATA SHEET PE8221 Plotted and Other Data Notes: Values at 25 °C, sea level 50 Ohm TNC DC Block Operating From 10 MHz to 18 GHz from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 50 Ohm TNC DC Block Operating From 10 MHz to 18 GHz PE8221 URL: http://www.pasternack.com/50-ohm-tnc-inner-outer-dc-block-0.1-18-ghz-pe8221-p.aspx PE8221 REV 2 © 2013 Pasternack Enterprises All Rights Reserved PE8221 REV FSCM NO. 53919 PE8221 DWG TITLE CAD FILE 112103 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 50 Ohm TNC DC Block Operating From 10 MHz to 18 GHz PE8221 CAD Drawing 3