SMB Jack to SMB Jack Bulkhead Adapter TECHNICAL DATA SHEET PE9122 SMB Jack to SMB Jack Bulkhead Adapter Configuration Connector 1 Impedance 1 Connector Specification 1 Connector 2 Impedance 2 Connector Specification 2 Adapter Design Body Style Mount Method SMB Jack 50 Ohms MIL-STD-348A SMB Jack 50 Ohms MIL-STD-348A Standard Straight Bulkhead Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 0.725 [18.42] 0.25 [6.35] Connector 1 Type Inner Conductor Material and Plating Inner Conductor Plating Specification Body Material and Plating Body Plating Specification Dielectric Type SMB Jack Brass, Gold 30µ in. minimum Brass, Nickel 100µ in. minimum Teflon Connector 2 Type Inner Conductor Material and Plating Inner Conductor Plating Specification Body Material and Plating Body Plating Specification Dielectric Type SMB Jack Brass, Gold 30µ in. minimum Brass, Nickel 100µ in. minimum Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level URL: http://www.pasternack.com/smb-jack-smb-jack-straight-adapter-pe9122-p.aspx SMB Jack to SMB Jack Bulkhead Adapter from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. PE9122 REV 1 PE9122 CAD Drawing SMB Jack to SMB Jack Bulkhead Adapter © 2012 Pasternack Enterprises All Rights Reserved PE9122 REV 2