75 Ohm Mini SMB Jack to Mini SMB Jack Adapter TECHNICAL DATA SHEET PE9608 75 Ohm Mini SMB Jack to Mini SMB Jack Adapter Configuration Connector 1 Impedance 1 Connector Specification 1 Connector 2 Impedance 2 Connector Specification 2 Adapter Design Body Style Mini SMB Jack 75 Ohms MIL-STD-348A Mini SMB Jack 75 Ohms MIL-STD-348A Standard Straight Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] 0.835 [21.21] 0.28 [7.11] Connector 1 Type Inner Conductor Material and Plating Inner Conductor Plating Specification Body Material and Plating Body Plating Specification Dielectric Type Mini SMB Jack Brass, Gold 50µ in. minimum Brass, Gold 3µ in. minimum Teflon Connector 2 Type Inner Conductor Material and Plating Inner Conductor Plating Specification Body Material and Plating Body Plating Specification Dielectric Type Mini SMB Jack Brass, Gold 50µ in. minimum Brass, Gold 3µ in. minimum Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level URL: http://www.pasternack.com/mini-smb-jack-mini-smb-jack-straight-adapter-pe9608-p.aspx 75 Ohm Mini SMB Jack to Mini SMB Jack Adapter from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. PE9608 REV 1 PE9608 CAD Drawing 75 Ohm Mini SMB Jack to Mini SMB Jack Adapter © 2012 Pasternack Enterprises All Rights Reserved PE9608 REV 2