FN Series Crystal Clock Oscillator (XO) Legacy S1613 Series 7.0 x 5.0mm FN 3.3V CMOS Low Jitter XO Package: Recommended Land Pattern: 2 8 2 7.0 x 5.0mm Ceramic SMD 8 Product Features • 1 to 166 MHz Frequency Range • <1 ps RMS jitter Pin Functions: Pin Function • Pin-compatible with standard 7.0 x 5.0mm packages 1 OE Function 2 Ground • Designed for standard reflow and washing techniques 3 Clock Output 4 V DD • 3.3V CMOS/TTL compatible logic levels • Low power standby mode • Pb-free and RoHS/Green compliant Product Description The FN Series 3.3V crystal clock oscillator achieves superb jitter and stability over a broad range of operating conditions and frequencies. The output clock signal, generated internally with a non-PLL oscillator design, is compatible with LVCMOS/LVTTL logic levels. The device, available on tape and reel, is contained in a 7.0 x 5.0mm surface-mount ceramic package. Part Ordering Information: FN XXX YYYY Following the above format, Saronix-eCera part numbers will be assigned upon confirmation of exact customer requirements. Applications Legacy Ordering Information - For Reference Only: Ideal for low jitter or tight stability applications: • 802.11a/b/g WiFi • Ethernet • Fibre Channel A: ProductFamily B: XXX = FrequencyCode C: YYYY = SpecificationCode SaRonix • EPON Product Series • SONET/SDH linecards • DSLAM Frequency Stability AA = ±20 ppm (-10 to +70 °C) A = ±25 ppm (-10 to +70 °C) B = ±50 ppm (-10 to +70 °C) E = ±50 ppm (-40 to +85°C) • T1/E1, T3/E3 linecards • Serial Attached SCSI (SAS) • Server & Storage platforms SaRonix-eCera™ is a Pericom® Semiconductor company S 1613 B - 75.0000 (T) • US: +1-408-435-0800 TW: +886-3-4518888 Packaging (T) = Tape & Reel full reel increments Blank = Bulk packaged Output Frequency (MHz) • All specifications are subject to change without notice. www.saronix-ecera.com FN 3.3 REV2008_DEC29_01.4 1 3.3V CMOS Low Jitter XO FN FN Series Crystal Clock Oscillator (XO) Legacy S1613 Series | 7.0 x 5.0mm Electrical Performance Parameter Min. Output Frequency Typ. 1 Supply Voltage +2.97 +3.3 Max. Units 166 MHz +3.63 V Notes As specified 15 1 to 32 MHz 25 Supply Current, Output Enabled 32 to 50 MHz mA 40 50 to 80 MHz 55 Supply Current, Standby Mode Frequency Stability Operating Temperature Range 1 to 36 MHz, 100 to 166 MHz 100 μA 36 to 70 MHz ±20 to ±50 ppm +70 -40 +85 Duty Cycle See Note 1 below Commercial (standard) °C Industrial (standard) 10% V DD V 15 pF 55 % Measured 50% V DD ns Measured 20/80% of waveform 90% V DD V Output Load 45 Rise and Fall Time μA -20 Output Logic 0, VOL Output Logic 1, VOH 80 to 166 MHz 10 up to 50 MHz 7 50 to 80 MHz 5 80 to 124 MHz 3 125 to 166 MHz 2.5 Jitter, Phase 1 to 166 MHz 1 Jitter, Accumulated up to 80 MHz 5 80 to 166 MHz 3 Jitter, Total up to 80 MHz 50 80 to 166 MHz 30 ps RMS (1-σ) 10kHz to 20 MHz frequency band ps RMS (1-σ) 20.000 adjacent periods ps pk-pk 100.000 random periods Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C), aging (1 year at 25°C average effective ambient temperature), shock and vibration. 2. For specifications othere than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Input Voltage (pin 1), Output Enable Typ. Max. Units 2.0 Input Voltage (pin 1), Output Disable (low power standby) 0.5 Internal Pullup Resistance 50 Notes V or open V Output is Hi-Z kΩ Output Disable Delay 100 ns Output Enable Delay 10 ms Absolute Maximum Ratings Parameter Storage Temperature Min. Typ. -55 SaRonix-eCera™ is a Pericom® Semiconductor company • Max. Units +125 °C US: +1-408-435-0800 TW: +886-3-4518888 Notes • All specifications are subject to change without notice. www.saronix-ecera.com FN 3.3 REV2008_DEC29_01.4 2 3.3V CMOS Low Jitter XO FN FN Series Crystal Clock Oscillator (XO) Legacy S1613 Series | 7.0 x 5.0mm Test Circuit Test Point Power Supply 4 0.1μF or 0.01μF 3 1 15 pF (Including probe and fixture capacitance) 2 Output Enable / Disable Function Reflow Soldering Profile As per IPC/JEDEC J-STD-020C Temperature – °C 1 to 3°C/sec max 260 Peak 260°C for 10 sec max 1 to 3°C/sec 217 60 to 90 sec Time 4 to 6 minutes max Reliability Test Ratings This product is rated to meet the following test conditions: Type Parameter Test Condition Mechanical Shock MIL-STD-883, Method 2002, Condition B Mechanical Solderability JESD22-B102-D Method 2 (Preconditioning E) Mechanical Terminal strength MIL-STD-883, Method 2004, Condition D Mechanical Gross leak MIL-STD-883, Method 1014, Condition C Mechanical Fine leak MIL-STD-883, Method 1014, Condition A2 (R1 = 2x10 -8 atm cc/s) Mechanical Solvent resistance MIL-STD-202, Method 215 Environmental Thermal shock MIL-STD-883, Method 1011, Condition A Environmental Moisture resistance MIL-STD-883, Method 1004 Environmental Vibration MIL-STD-883, Method 2007, Condition A Environmental Resistance to soldering heat J-STD-020C Table 5-2 Pb-free devices (2 cycles max) SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • All specifications are subject to change without notice. www.saronix-ecera.com FN 3.3 REV2008_DEC29_01.4 3