Model P Stacking Pin Tip Plug, Each End FEATURES: • Stackable pin tip plugs. • Mates to Model #3542, 4773 or any other standard .08 inch pin jack. • Ideal for use as jumper wires on chassis boxes. MATERIALS: Conn: Pin Tip Plug Material: Pin Tip Body – Brass per QQ-B-626, Alloy 360, ½ Hard. Stack-Up Spring – Beryllium Copper per QQ-C-533, Alloy C172, Cond. HT. Finish: Gold plated per MIL-G-45204, Type II, Class 00 over electroless nickel per QQ-N-290, Class I, 100/200 microinches. Insulation: Polypropylene molded to pin tip body and wire. Color: Matches color of wire. Marking: “POMONA ELECTRONICS.” Wire: 20 AWG - stranding 41 x 36, t.c., PVC insulated, 2.21 (.087) O.D. Color: See Ordering Information. Marking: “POMONA P-XX.” RATINGS: Operating Temperature: +55ºC. (+131ºF.) Max. Operating Voltage: 3000 WVDC Current: 5 Amperes Cont. ORDERING INFORMATION: Model P-XX-* XX = Cable Lengths, Standard Lengths: 4” (102), 8” (203), 12” (305), 18” (457), 24” (610), 36” (914), 48” (1219) & 60” (1524). Additional lengths and colors can be quoted upon request. *= Color, -0 Black, -2 Red Ordering Example: P-60-2 Indicates 60” in length, Color is Red All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 5/21/02 SY/EH/LS Last saved by PN Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 S:\Engineering\Release\DataSheets\FlukeDataSheet \d_P_1083_1_02.doc PomonaACCESS 90537 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1