6 5 4 3 2 29.5+0.5 23-0.5 14±0.2 MATERIAL AND FINISH: Insulator: Polycarbonate, UL-94V-0 rated. Pin contact: Brass, Nickel plated. Solder Terminals: Brass, tin plated. 1 19 35 D ELECTRICAL SPECIFICATIONS: Rated current: 10A Rated voltage: 250VDC C L±0.5 58.5 82.1 105.7 129.3 152.9 176.5 15.8-0.5 F+0.2 55.9 79.5 103.1 126.7 150.3 173.9 E±0.4 55.4 79.0 102.6 126.2 149.8 173.4 10A 250V~ 10A 250V~ L±0.5 E±0.4 10A 250V~ 16.0+0.5 F+0.2 10A C X.X No of Port 1 2 3 4 5 6 X.X D 250V~ N E Use Only With 250v Fuse Emplyoer Uniquement Avec Un fusible de 250V 32.5+0.2 R2.5 TYP. 3.0 24.0+0.5 B 0.80 TYP. 6.3 TYP. B 26 REPLACE WITH CORRESPONDING PANEL THICKNESS PB PB TD REV. TERM. LENGTHS; ADD DIM 12/16/05 B CHANGE 10/11/01 A REVISED TOL & DIM F DATE REV REVISIONS CHNG CHCK APPR RECOMMENDED PANEL CUTOUT A L TOLERANCE UNLESS OTHERWISE SPECIFIED X ± 1 X.X ± 0.4 X.XX ± 0.20 A MAX. PANEL THICKNESS P/N 1.5 44R01-X131-150 1.5 DRAWN BY 2.5 44R01-X131-250 2.5 CHECK ADDITIONAL PANEL THICKNESS & .187 [4.8] BY APPR QC AVAILABLE ON REQUEST BY 6 5 4 DT DATE: 10/02/01 PB DATE: 10/3/01 PB DATE: 10/3/01 3 Phone: 973 560-0019 Whippany, New Jersey Fax: 973 560-0076 PART: IEC 60320 STRIP APPL. INLET & OUTLET SNAP IN, QC TERM., 5x20mm FUSE HOLDER PART #: SIZE: SCALE: SHEET 1 of 1 44R01-X131-XXX A NTS 2 ALL DIMENSIONS FOR REFERENCE ONLY DIMENSIONS ARE IN MILLIMETERS 1 REV: B A