05382 PLED508 Only One Name Means ProTek’Tion™ bidirectional tvs die PIN CONFIGURATION electrical characteristics @ 25°C PART NUMBER PLED508 MINIMUM stand-off maximum TYpical thickness backmetal TOPmetal BREAKDOWN VOLTAGE LEAKAGE CAPACITANCE VOLTAGE CURRENT @ 1mA V(BR) VOLTS V WM VOLTS @3.5V ID µA @0V, 1MHz C pF mils 5.70 4.7 1.00 15 6 Ti/Ni/Ag Al/Cu MASK OUTLINE 177 [7.0] sq (TYP) BONDING PAD R7.62 [R0.30] 63.5 [2.5] sq 43.18 [1.70] 2x 2.54 [0.10] 2x 20.32 [0.80] 2x 38.10 [1.50] 2x 40.64 [1.60] 5.08 [0.20] 2x 17.75 [0.70] 2x 38.10 [1.50] 2x 30.48 [1.20] 2x 05382.R2 9/12 Page 1 www.protekdevices.com 05382 PLED508 Only One Name Means ProTek’Tion™ company information COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products. These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses (NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2012 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05382.R2 9/12 Page 2 www.protekdevices.com