05181 SLVU2.8-8 Only One Name Means ProTek’Tion™ 600 WATT MULTI-LINE ultra LOW CAPACITANCE TVS ARRAY Description The SLVU2.8-8 is an ultra low capacitance TVS array that provides four line pairs of protection. This device protects high-frequency applications such as voice, video and data related systems and is designed to minimize the effects of high overshoot voltage experienced during and ESD event. This device has an in-line design, which reduces lead inductance thus providing lower overshoot voltage. The SLVU2.8-8 meets IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. Packaged in an SO-8 configuration, this device is rated for 600 Watts Peak Pulse Power, for an 8/20µs waveform. SO-8 package Features applications • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(LineGnd) & Level 3(Line-Line) • 600 Watts Peak Pulse Power per Line (tp = 8/20µs) • Protects up to Four Line Pairs • Low Leakage Current < 1.0µA • Ultra Low Capacitance: 6pF Typical • RoHS Compliant • REACH Compliant • Ethernet - 10/100/1000 Base T • SMART Phones • Audio/Video Inputs • Portable Electronics Mechanical characteristics • Molded JEDEC SO-8 Package • Approximate Weight: 70 milligrams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 12mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 PIN CONFIGURATION 05181.R5 10/12 8 7 6 5 1 2 3 4 Page 1 www.protekdevices.com 05181 SLVU2.8-8 Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 SYMBOL VALUE UNITS PPP 600 Watts Peak Pulse Current (tp = 8/20µs) IPP 30 Amps Lead Soldering Temperature IFRM 260 °C TL -55 to 150 °C TSTG -55 to 150 °C Operating Temperature Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Note 1) SLVU2.8-8 DEVICE RATED minimum minimum MARKING STAND-OFF breaksnapback VOLTAGE down VOLTAGE (Note 1) voltage (Note 1) (Note 1) SL8 VWM VOLTS @1mA V(BR) VOLTS 2.8 3.0 MAXIMUM CLAMPING VOLTAGE (Note 1) (Fig. 2) MAXIMUM typical LEAKAGE CAPACITANCE CURRENT (Note 1) (Note 1) @I sb = 50mA @I pp = 2A @I pp = 5A @I pp =24A @I pp = 30A VSB VC VC VC VC VOLTS VOLTS VOLTS VOLTS VOLTS 2.8 5.5 8.5 15 17 @V WM ID µA @0V, 1MHz C pF 1.0 6 Notes 1. Device measured between pin 1 to pin 2, pin 3 to pin 4, pin 5 to pin 6 and pin 7 to pin 8. 05181.R5 10/12 Page 2 www.protekdevices.com 05181 SLVU2.8-8 Only One Name Means ProTek’Tion™ typical device characteristics figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - Watts 10,000 1,000 600W, 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse Duration - µs IPP - Peak Pulse Current - % of IPP 10,000 figure 2 pulse wave form 120 tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t/(IPP/2) 20 0 05181.R5 10/12 1,000 0 5 10 15 t - Time - µs Page 3 20 25 30 www.protekdevices.com 05181 SLVU2.8-8 Only One Name Means ProTek’Tion™ typical device characteristics 100 figure 3 power derating curve Peak Pulse Power 8/20µs % Of Rated Power 80 60 40 20 0 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 figure 4 typical clamping voltage vs peak pulse current 20 VC - Clamping Voltage - V 16 12 8 4 0 0 05181.R5 10/12 5 10 15 20 IPP - Peak Pulse Current - Amps Page 4 25 30 www.protekdevices.com 05181 SLVU2.8-8 Only One Name Means ProTek’Tion™ application information Line 1 Line 2 1 8 2 7 3 6 4 5 Line 3 Line 4 figure 1 - bidirectional common-mode protection The SLVU2.8-8 provides 4 lines of protection in a common mode configuration. Circuit connectivity is as follows: • Line 1 connected to Pin 1 • Line 2 connected to Pin 8 • Line 3 connected to Pin 5 • Line 4 connected to Pin 4 • Pins 2, 3, 6, 7 are connected to ground 8 1 Line Pair 1 Line Pair 3 2 7 3 6 Line Pair 2 Line Pair 4 5 4 figure 2 - bidirectional differential-mode protection The SLVU2.8-8 provides four line pairs in a differential mode configuration. Circuit connectivity is as follows: • Line Pair 1 connected to Pins 1 & 2 • Line Pair 2 connected to Pins 3 & 4 • Line Pair 3 connected to Pins 5 & 6 • Line Pair 4 connected to Pins 7 & 8 circuit board recommendations Circuit board layout is critical for electromagnetic compatibility protection. The following guidelines are recommended: • The protection device should be placed near the input terminals or connectors, the device will divert the transient current immediately before it can be coupled into the nearby traces. • The path length between the TVS device and the protected line should be minimized. • All conductive loops including power and ground loops should be minimized. • The transient current return path to ground should be kept as short as possible to reduce parasitic inductance. • Ground planes should be used whenever possible. For multilayer PCBs, use ground vias. 05181.R5 10/12 Page 5 www.protekdevices.com 05181 SLVU2.8-8 Only One Name Means ProTek’Tion™ SO-8 package information outline dimensions dim millimeters -A- inches min max min max A 4.80 5.00 0.189 0.196 B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.054 0.068 D 0.35 0.49 0.014 0.019 F 0.40 1.25 0.016 0.049 G 1.27 BSC 8 5 -B- 1 G 4 D 0.18 0.25 0.007 0.009 K 0.10 0.25 0.004 0.008 P 5.80 6.20 0.229 0.244 R 0.25 0.50 0.010 0.019 R x 45° C 0.05 BSC J + 0.010” (0.25mm) M B M 4 PL P 0° - 10° -T- K + 0.010” (0.25mm) M T B S A S 8 PL J F NOTES 1. 2. 3. 4. 5. 6. -T- = Seating plane and datum surface. Dimensions “A” and “B” are datum. Dimensions “A” and “B” do not include mold protrusion. Maximum mold protrusion is 0.015” (0.380mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. A pad layout dimensions dim millimeters B inches min max min max A 1.14 1.40 0.045 0.055 B 0.64 0.89 0.025 0.035 C 6.22 - 0.245 - D 3.94 4.17 0.155 0.165 E 1.02 1.27 0.040 0.050 NOTES 1. Controlling dimension: inches. 05181.R5 10/12 D C E Page 6 www.protekdevices.com 05181 SLVU2.8-8 Only One Name Means ProTek’Tion™ TAPE AND REEL P0 D t 10 Pitches Cumulative Tolerance on tape ± 0.2 P2 E F W K0 B0 A0 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 12mm A0 B0 K0 D E F W P0 P2 P tmax 6.50 ± 0.10 5.40 ± 0.10 2.00 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 5.50 ± 0.05 12.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10 0.25 Notes 1. 2. 3. 4. 5. 6. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 1,000 pieces per 12mm tape. Suffix - T13 = 13” Reel - 2,500 pieces per 12mm tape. Bulk product shipped in tubes of 98 pieces per tube. Marking on Part - marking code (see page 2), date code, logo and pin one defined by dot on top of package. Package outline, pad layout and tape specifications per document number 06009.R3 9/10. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty SLVU2.8-8 -LF -T7 1,000 7” 98 SLVU2.8-8 -LF -T13 2,500 13” 98 This device is only available in a Lead-Free configuration. 05181.R5 10/12 Page 7 www.protekdevices.com 05181 SLVU2.8-8 Only One Name Means ProTek’Tion™ company information COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products. These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses (NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05181.R5 10/12 Page 8 www.protekdevices.com