05140 USB004 Only One Name Means ProTek’Tion™ ultra low capacitance steering diode array Description The USB004 is an ultra low capacitance (typically 3pF) steering diode array. This device provides circuit protection for interfaces and wireless bus applications and portable electronics. The USB004 is ideally suited to protect USB data I/O ports against the effects of ESD and EFT. The USB004 meets the requirements of IEC 61000-4-2 (ESD) and IEC 61000-4-4 (EFT). At higher operating frequencies or faster edge rates, insertion loss and signal integrity are a major concern. The USB004 offers a ultra low capacitance and low leakage current in a SOT-143 package. SOT-143 package Features applications • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Provides 2 Lines of Protection • Low Leakage Current < 1.0µA • Ultra Low Capacitance: 3pF Typical • RoHS Compliant • REACH Compliant • USB Interface Ports • SMART Phones • Video • Portable Electronics • Laptops Mechanical characteristics • Molded JEDEC SOT-143 Package • Approximate Weight: 9 milligrams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 8mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 PIN CONFIGURATION 05140.R11 10/12 1 4 2 3 Page 1 www.protekdevices.com 05140 USB004 Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS TA -55 to 150 °C Storage Temperature TSTG -55 to 150 °C Continuous Power Dissipation PPC 225 mW Repetitive Peak Forward Current @ tp = 5µs, F = 50kHz (Pin 2-3) IFRM 700 mA Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER USB004 DEVICE MARKING PSA REPETITIVE PEAK REVERSE VOLTAGE (Note 1) @ 10µa VRRM VOLTS MAXIMUM REVERSE LEAKAGE CURRENT (Note 2) @ vrrm @ 5v IR µA maximum diode forward voltage maximum CAPACITANCE (Note 3) @ 20mA VF VOLTS Cj pF 20 1 0.95 6 notes 1. VP - VN = 20 Volts. 2. VP - VN = 5.5 Volts. 3. Between line and ground - VP = 5 Volts, f = 1 MHz, VI/O = 2.5 Volts, VN = 0 Volts. 05140.R11 10/12 Page 2 www.protekdevices.com 05140 USB004 Only One Name Means ProTek’Tion™ typical device characteristics figure 1 peak forward current vs forward voltage IF - Forward Current - A 10 8 6 4 2 0 0 1 2 3 4 5 6 7 8 9 10 VF - Forward Voltage - V figure 2 low forward current vs forward voltage IF - Forward Current - mA 110 90 70 50 30 10 800 840 880 920 960 1000 VF - Forward Voltage - V 05140.R11 10/12 Page 3 www.protekdevices.com 05140 USB004 Only One Name Means ProTek’Tion™ SOT-143 package information A outline dimensions dim millimeters inches min max min max A 2.80 3.04 0.110 0.120 B 1.20 1.39 0.047 0.055 C 0.84 1.14 0.033 0.045 D 0.39 0.50 0.015 0.020 F 0.79 0.93 0.031 0.037 G 1.78 2.03 0.070 0.080 J 0.08 0.15 0.003 0.006 K 0.46 0.60 0.018 0.024 L 0.445 0.60 0.0175 0.024 L1 0.40 0.60 0.016 0.024 R 0.72 0.83 0.028 0.033 S 2.11 2.48 0.083 0.098 L G B S J K L1 F D H C R NOTEs 1. Dimensioning and tolerances per ANSI Y14.M, 1985. 2. Controlling dimension: inches. 3. Dimensions are exclusive of mold flash and metal burrs. pad layout dimensions dim millimeters A C inches min max min max A 1.88 2.13 0.074 0.084 B 1.80 2.06 0.071 0.081 C 0.71 0.97 0.028 0.038 D 0.76 1.02 0.030 0.040 E 1.07 1.32 0.042 0.052 F 0.71 0.97 0.028 0.038 B D E F NOTES 1. Controlling dimension: inches. 05140.R11 10/12 Page 4 www.protekdevices.com 05140 USB004 Only One Name Means ProTek’Tion™ TAPE AND REEL P0 t 10 Pitches Cumulative Tolerance on Tape. ± 0.2 P2 D E Top Cover Tape Pin 1 A0 F W K0 B0 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P 3.10 ± 0.10 2.70 ± 0.10 1.35 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 tmax 0.25 Notes 1. 2. 3. 4. 5. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape. Suffix - T13 = 13” Reel - 10,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and date code. Package outline, pad layout and tape specifications per document number 06011.R4 8/10. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty USB004 -LF -T7 3000 7” n/a USB004 -LF -T13 10,000 13” n/a This device is only available in a Lead-Free configuration. 05140.R11 10/12 Page 5 www.protekdevices.com 05140 USB004 Only One Name Means ProTek’Tion™ company information COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products. These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses (NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05140.R11 10/12 Page 6 www.protekdevices.com