SMT POWER INDUCTORS Toroid - Polecat Series Height: 5.5mm Max Footprint: 12.7mm x 12.7mm Max Current Rating: up to 8.3A Inductance Range: 2.0µH to 364µH Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C 11 Part Number Inductance @ Irated (µH MIN) Irated (A) DCR (MAX) (mΩ) ET (V-µsec) Inductance @0ADC (µH ±10%) 100 Gauss ET100 (V-µsec) 1 Amp DC H1 (Orsted) Connection P0174NL P0175NL P0176NL P0174NL P0177NL P0175NL P0178NL P0179NL P0176NL P0180NL P0177NL P0181NL P0178NL P0182NL P0179NL P0183NL P0180NL P0181NL P0182NL P0183NL 2.0 2.4 5.0 7.0 9.3 8.4 14.1 19.8 17.9 29.3 33.8 42.6 50.9 61.3 71.5 84.2 106.1 154.2 218.9 295.0 8.30 7.20 5.20 4.16 3.80 3.78 3.10 2.60 2.60 2.20 1.89 1.80 1.54 1.50 1.30 1.20 1.07 0.89 0.74 0.64 7.6 10.9 19.0 32.0 29.8 43.6 45.3 66.3 76.0 106 120 151 182 224 266 324 404 604 888 1272 7.31 7.81 11.72 14.61 16.12 15.62 19.73 23.45 23.43 28.50 32.25 34.49 39.46 40.85 46.90 46.22 57.00 68.99 81.70 92.43 2.2 2.6 5.5 8.75 10.4 10.4 15.7 22.1 22.45 32.8 41.7 47.6 62.8 67.5 88.2 91.0 131.0 190.3 270.2 364.0 1.20 1.33 1.93 2.41 2.65 2.65 3.25 3.86 3.86 4.70 5.30 5.66 6.51 6.75 7.71 7.83 9.40 11.33 13.50 15.66 5.43 5.97 8.69 10.86 11.95 11.95 14.66 17.38 17.38 21.18 23.89 25.52 29.32 30.41 34.75 35.30 42.36 51.05 60.82 70.59 Parallel Parallel Parallel Series Parallel Series Parallel Parallel Series Parallel Series Parallel Series Parallel Series Parallel Series Series Series Series 9,10 NOTES: 1. Temperature rise is 50°C in typical buck or boost circuits at 250kHz and with the reference ET applied to the inductor. 2. Total loss in the inductor is 380mW for a 50°C temperature rise above ambient. 3. To estimate temperature rise in a given application, determine copper and core losses, divide by 380 and multiply by 50. 4. For the copper loss (mW), calculate IDC2 X RN. 5. For core loss (mW), using frequency (f in Hertz) and operating flux density (B in Gauss), calculate 6.11 x 10-18 x B2.7 x f2.04. 6. For flux density (B in Gauss), calculate ET (V-µsec) for the application, divide by ET100 from the table, and multiply by 100. 7. Limit the DC bias (H) to 46 orsteds. Calculate H by multiplying H1 from the table by IDC of the application. 8. The maximum DCR listed is approximately 17% over the nominal DCR. 9. Optional Tape & Reel packaging can be ordered by adding a "T" suffix to the part number (i.e. P0174NL becomes P0174NLT). Pulse complies to industry standard tape and reel specification EIA481. 10. The "NL" suffix indicates an RoHS-compliant part number. Non-NL suffixed parts are not necessarily RoHS compliant, but are electrically and mechanically equivalent to NL versions. If a part number does not have the "NL" suffix, but an RoHS compliant version is required, please contact Pulse for availability. 11. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. Schematic Mechanical .500 MAX 12,70 .330 8,38 R 1 2 .500 MAX 12,70 P01XX Date Code Country of Origin 4 3 4X .060 1,52 4X .175 4,45 .410 10,41 Suggested Pad Layout .215 MAX 5,46 .005/0,13 4 SURFACES .330 8,38 .410 10,41 1 4 2 3 1:1 ±2% Weight . . . . . . . . 1.5 grams Tape & Reel . . . . . . 500/reel Tube . . . . . . . . . . . . 35/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 755 33966678 • Taiwan 886 3 4641811 www.pulseeng.com 72 SPM2007 (11/07)