SMT POWER INDUCTORS Wire Wound Height: 12.2mm Max Footprint: 22.2 x 19.1mm Max Current Rating: Over 22Apk Inductance Range: 5.8µH to 57µH Weight: ±4% Electrical Specifications @ 25°C — Operating Temperature -55°C to +130°C 2 Inductance Inductance Saturation 1 C urrent Isat Part Irated DCR @0A dc @Irated (A TYP) Number (A DC) (mW ±10%) (µH ±10%) (µH TYP) 25°C100°C P A2050.582NL PA2050.782NL PA2050.103NL PA2050.163NL PA2050.193NL PA2050.233NL PA2050.273NL PA2050.313NL PA2050.363NL PA2050.393NL PA2050.413NL PA2050.583NL 5.8 7.8 10.2 16.0 19.4 23.0 27.0 31.4 36.0 38.9 41.0 57.8 5.8 7.8 10.2 16.0 19.4 23.0 26.2 30.6 35.2 37.5 40.0 57.8 14.4 13.3 12.5 9.9 8.5 8.0 7.8 6.7 6.0 6.0 6.0 5.0 4.4 5.1 5.8 9.1 12.6 13.7 14.9 20.2 21.6 18.8 23.1 34.5 22 17 18 16 16 15 12 11 11 10 9.8 8 9 8 8.4 8 8 6 6.3 6 7.3 6 6.2 5 Heating 3 Core Loss Current I dc Factor (A TYP)K2 14.4 13.3 12.5 9.9 8.5 8.1 7.8 6.7 6.5 6.2 6.2 5.1 155 181 206 258 284 310 335 361 387 482 413 490 Notes: 1. The rated current as listed is either the saturation current or the heating current depending 4. In high volt*time applications, additional heating in the component can occur due to on which value is lower. core losses in the inductor which may neccessitate derating the current in order to limit 2. The saturation current is the typical current which causes the inductance to drop by 20% at the temperature rise of the component. To determine the approximate total losses (or the stated ambient temperatures (25°C and 100°C). This current is determined by placing temperature rise) for a given application, the coreloss and temperature rise formula the component in the specified ambient environment and applying a s hort duration can be used: pulse current (to eliminate self-heating effects) to the component. ΔB (Gauss) = K2 * ΔI 3. The heating current is the DC current which causes the part temperature to increase by Core Loss (W) = 1.5E-13 * (Freq_kHz) 1.63 * ΔB2.62 approximately 40°C. 5. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. 6. Add “T” suffix to the part number for Tape & Reel version (i.e. PA2050.582NLT). USA 215 781 6400 Germany 49 7032 7806 0 1 Singapore 65 6287 8998 pulseelectronics.com Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768 P661.C (10/13) PE-65612NL Mechanicals Schematics Inches Dimensions: SMT POWER INDUCTORS Wire Wound mm Unless otherwise specified, all tolerances are ± .010 0,25 Inductance vs Current Characteristics pulseelectronics.com 2 P661.C (10/13) SMT POWER INDUCTORS Wire Wound Inductance vs Current Characteristics (continued) For More Information Pulse North America Headquarters Two Pearl Buck Court Bristol, PA 19007 U.S.A. Pulse Europe Einsteinstrasse 1 D-71083 Herrenberg Germany Pulse China Headquarters B402, Shenzhen Academy of Aerospace TechnolBldg. ogy 10th Kejinan Road High-Tech Zone Nanshan District Tel: 215 781 6400 Shenzen, PR China Fax: 215 781 6403 Tel: 49 7032 7806 518057 Pulse North China Room 2704/2705 Super Ocean Finance Ctr. 2067 Yan An Road West Shanghai 200336 China Pulse South Asia 135 Joo Seng Road #03-02 PM Industrial Bldg. Singapore 368363 Tel: 65 6287 8998 Fax: 65 6287 8998 Pulse North Asia 3F, No. 198 Zhongyuan Road Zhongli City Taoyuan County 320 Taiwan R. O. C. Tel: 886 3 4356768 Fax: 886 3 4356823 (Pulse) Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2013. Pulse Electronics, Inc. All rights reserved. 3 pulseelectronics.com P661.C (10/13)