THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. A B C REVISION DESCRIPTION Changed HDMI/M Mold Design / Changed from Crimp Terminal to Solder Terminal Graphics and Notes Update Updated Connector Molding and Notes DATE 03-12-07 APPROVED DP 01-28-08 12-03-13 DP LY 915 ± 20mm 4 4 CN2 CN1 2 9.0 ± 0.3 0 1 3.8 ± 0.3 TRANSPARENT TAPE 3 LABEL MINI TIE*2 NOTES: 1. CABLE: UL20276 (28AWG*1PR+EAM)*4+28AWG*1PR+28AWG*3C+AE(BA)B(AL) 65% OUTER JACKET: BLACK, OD: 7.2 ± 0.2mm 2. CONNECTOR: HDMI 19P MALE INSULATOR: BLACK PBT PIN G/F NICKEL PLATED SHELL 3. CONNECTOR: DVI 18+1 MALE INSULATOR: BLACK PIN G/F NICKEL PLATED SHELL THUMB SCREW: 2.8*32.5mm 4-40UNC 4. PVC MOLDED: 45P BLACK 5. ELECTRICAL TEST: <1>.100% OPEN SHORT & MISS WIRE TEST <2>. INSULATION RESISTANCE: DC300V 20M ohm MIN. <3>. CONDUCTOR RESISTANCE: 2 ohm MAX. 6. 1PC/POLYBAG Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: WCT DIVISION 1721003-03 Description: HDMI/M - DVI (18+1)P/M UNIT: mm REV. C 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B. Grubb 01-25-07 01-25-07 JJH / 01-25-07