New! T1 / CEPT / ISDN-PRI SMD 40 Pin Quad Modules 4 Transformers Per Part Electrical Specifications Part Number at 25o C Turns Ratio + 5% For T1/CEPT/PRI Telecom Applications Designed to meet CCITT and FCC Requirements 1500 VRMS Minimum Isolation 1, 2 OCL Min. ( mH ) CW/W max. ( pF ) LL max. ( µH ) DCR Pri. max. (Ω) DCR Sec. max. (Ω) Schem. Style T-16200 1:1.36CT & 1:2CT 1.2 35 0.6 0.7 0.9 "3" T-16201 1:2CT & 1:2CT 1.2 35 0.6 0.8 1.8 "3" T-16202 1:1:1.26 & 1:2CT 1.2 35 0.6 0.8 0.8 / 1.8 "2" T-16203 1:1.15 & 1:2CT 1.2 35 0.6 0.8 0.8 / 1.8 "1" T-16204 1:1CT & 1:1CT 1.2 35 0.6 0.8 0.8 "3" T-16205 1CT:2CT & 1CT:2CT 1.2 35 0.6 0.7 1.4 "8" T-16206 1:2CT & 1:1CT 1.2 35 0.6 0.8 1.8 / 0.8 "2" T-16207 1CT:2CT & 1:1 1.2 35 0.6 0.7 0.9 "6" T-16208 1:2CT & 1:1.36 1.2 35 0.6 0.8 1.8 / 0.8 "7" T-16209 1:1.14CT & 1:2CT 1.2 35 0.6 0.7 0.9 "3" T-16210 1:1.36 & 1:2CT 1.2 35 0.6 0.7 1.0 "1" T-16211 1:1.36 & 1:1.36CT 1.2 35 0.4 / 0.5 0.7 1.0 "1" T-16212 1:1.15 & 1:1.15 1.2 35 0.6 0.8 0.8 / 1.8 "5" T-16213 1:1.14 & 1:1.14CT 1.2 35 0.6 0.8 0.8 / 1.8 "1" T-16214 1:2 & 1:2CT 1.2 35 0.6 0.8 1.8 "4" T-16215 1:2 & 1:2 1.2 35 0.6 0.8 1.8 "5" T-16216 1CT:1.41 & 1CT:1.41 1.2 35 0.6 0.8 1.8 "3" T-16217 1:2CT & 1CT:2 1.2 35 0.6 0.7 / 1.0 1.0 / 0.7 "3" P/N T-16200 T-16201 T-16202 T-16203 T-16204 T-16205 T-16206 T-16207 T-16208 T-16209 T-16210 T-16211 T-16212 T-16213 T-16214 T-16215 T-16216 T-16217 Primary Pins 28-30, 38-40 / 6-8, 16-18 6-8, 16-18 / 28-30, 38-40 1-3, 11-13 / 23-25, 33-35 1-3, 11-13 / 23-25, 33-35 6-8, 16-18 / 28-30, 38-40 6-8, 16-18 / 28-30, 38-40 1-3, 11-13 / 23-25, 33-35 1-3, 11-13 / 23-25, 33-35 28-30, 38-40 / 6-8, 16-18 28-30, 38-40 / 6-8, 16-18 1-3, 11-13 / 23-25, 33-35 1-3, 11-13 / 23-25, 33-35 1-3, 11-13 / 6-8, 16-18 1-3, 11-13 / 23-25, 33-35 1-3, 16-18 / 28-30, 33-35 1-3, 11-13 / 6-8, 16-18 1-3, 11-13 / 23-25, 33-35 6-8, 16-18 / 1-3, 11-13 Specifications subject to change without notice. Rhombus Industries Inc. OCL Tested at 100kHz 50mV Flammability: Materials used in the production of these units meet requirements of UL94-VO and IEC 695-2-2 needle flame test. Dual Port design Parts shipped in anti-static tubes. Custom Designs Available Other Configurations and Packages Available See Our Web Page Under Data Communications/T1 Tape & Reel Available For other values & Custom Designs, contact factory. www.rhombus-ind.com T1-DP40 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Tel: (714) 898-0960 • Fax: (714) 896-0971 40-Pin 50 mil SMD Package Physical Dimensions in inches (mm) 1.120 (28.45) .485 (12.32) MAX. MAX. .230 (5.84) MAX. .016 (0.41) .050 (1.27) TYP. TYP. 38 35 1 3 6 40 38 35 34 33 30 3 6 11 12 13 40 38 35 33 30 1 3 6 8 11 40 38 35 33 30 3 6 8 7 .010 (0.25) 2 23 40 39 38 30 29 28 23 25 28 25 8 11 13 16 17 18 1 3 25 24 23 40 38 35 16 18 1 3 6 28 25 23 40 37 38 35 34 33 30 29 28 25 24 23 13 16 18 1 6 11 12 13 16 17 18 28 25 23 40 39 38 35 33 30 29 28 25 23 11 12 13 16 18 1 6 8 11 12 13 16 18 8 Specifications subject to change without notice. Rhombus Industries Inc. 33 30 6 28 7 8 13 16 17 18 28 25 23 11 12 13 16 18 11 Schematic Style "4" 33 7 8 30 Schematic Style "6" 2 3 Schematic Style "7" 2 35 33 Schematic Style "5" 1 .640 (16.26) .620 (15.75) TYP. Schematic Style "3" 1 TYP. TYP. Schematic Style "2" Schematic Style "1" 40 .010 (0.25) .045 (1.14) 7 8 Schematic Style "8" 2 3 For other values & Custom Designs, contact factory. www.rhombus-ind.com T1-DP40 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Tel: (714) 898-0960 • Fax: (714) 896-0971