F-213-1 FTS–110–02–F–DV FTS–111–02–L–DV–SA FTS–122–01–F–DV FTS–116–02–L–D (1,27 mm) .050" FTS SERIES MICRO LOW PROFILE TERMINAL STRIPS SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?FTS Mates with socket strips or IDC cable Mates with: FFSD, CLP, FLE, SFMC (LIF) Low profile (1,27 mm) .050" OPTIONS Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Current Rating: 1.75A per contact @ 80°C ambient Operating Temp Range: -55°C to +125°C Plating: Sn or Au over 50µ" (1,27 µm) Ni RoHS Compliant: Yes Lead–Free Solderable: Yes SMT Lead Coplanarity: .004" (0,10 mm) max –S OPTION –SA OPTION Surface mount or through-hole –P OPTION Shrouded and alignment pin options available ALSO AVAILABLE Micro pitch .050" x .050" (1,27 mm x 1,27 mm) –TR OPTION Impedance matched for high speed applications APPLICATION SPECIFIC OPTION Alignment Pin. Call Samtec. FTS 1 NO. PINS PER ROW LEAD STYLE 02 thru 50 (except –S & –SA option = 05 thru 46) (5,84) .230 No. of positions x .050 (1,27) 02 50 (1,27) .050 (3,42) .135 49 01 (1,27) .050 (2,16) .085 50 01 No of positions x .050 (1,27) + .325 (8,25) = –SA No of positions x .050 (1,27) + .200 (5,08) = – S 46 (4,70) .185 (0,86) .034 Note: Some lengths, styles and options are non-standard, non-returnable. (3,48) .137 01 ROW OPTION OTHER OPTION (–D & –DV only) –01 –F –D = .120" (3,05 mm) Post (Mates with FFSD) = Gold flash on post, Matte Tin on tail = Double Through-hole –02 –L = Double Vertical SMT = 10µ" (0,25 µm) Gold on post, Matte Tin on tail = Single Through-hole = .075" (1,91 mm) Post (Mates with FLE) –SA = End Shroud with Alignment Pin (05 thru 46 positions. Style -02 & -03 only) –DV –S –S = End Shroud (05 thru 46 positions. Style -02 & -03 only) –SV = Single Vertical SMT –03 (4,57) .180 02 PLATING OPTION Single row (Mates to CLP Series). Call Samtec. = .065" (1,65 mm) Post (Mates with CLP) –P (3,56) .140 (1,40) .055 –SA OPTION LEAD A STYLE – 01 (3,05) .120 – 02 (1,91) .075 – 03 (1,65) .065 (1,59) .0625 (1,27) .050 DIA (3,30) .130 X (5,08) .200 (4,06) .160 –P OPTION = Pick & Place Pad (05 positions minimum) –TR = Tape & Reel (-DV only) (Required callout for positions 2 thru 4) 45 (0,41) .016 SQ (2,29) .090 (Shrouded options removed for clarity) –S (1,27) .050 A –SV –D WWW.SAMTEC.COM (3,56) .140 A –DV –S OPTION