SECELECTRONICS SS41LSOT

SS41
Bipolar Hall-Effect Position Sensor
Features and Benefits
–
–
–
–
–
–
–
–
–
Application Examples
4.5V to 24V Operation
-40℃ to 150℃ Superior temperature operation
Bipolar technology
Open-collector 25 mA output
Reverse battery protection
Small Size-SOT23 3L or SIP 3L
Solid-state reliability
Resistant to physical stress
Activate with small, commercially available
permanent magnets
–
–
–
–
–
–
–
3 pin SOT23 (suffix SO)
Brushless DC motor commutation
Automotive, Consumer and Industrial
Solid-state switch
Speed measurement
Revolution counting
Angular position detection
Proximity detection
3 pin SIP (suffix UA)
1
V2.00 May 1, 2012
SS41
Bipolar Hall-Effect Position Sensor
General Description
The SS41 is an integrated Hall effect latched sensor designed
for electronic commutation of brush-less DC motor
applications. The device integrates a voltage regulator,
reverse battery protection diode, Hall sensor with dynamic
offset cancellation system, temperature compensation
circuitry, small signal amplifier, Schmitt trigger and an
open-collector output to sink up to 25 mA.
changes. If a magnetic flux density larger than threshold Bop,
Output is turned on (low). The output state is held until a
magnetic flux density reversal falls below Brp, causing
Output to be turned off (high).
Thanks to its wide operating voltage range and extended
choice of temperature range, it is quite suitable for use in DC
motor applications.
These Hall-effect switches are monolithic integrated circuits
with tighter magnetic specifications, designed to operate
continuously over extended temperatures to +150℃,and are
more stable with both temperature and supply voltage
The device is delivered in a Small Outline Transistor (SOT)
or in a Plastic Single In Line (SIP 3L flat). Both 3-lead
packages are RoHS compliant.
Glossary of Terms
MilliTesla (mT),
Units of magnetic flux density: 1mT = 10 Gauss
RoHS
Restriction of Hazardous Substances
Operating Point (B OP )
Magnetic flux density applied on the branded side of the package which turns the output
driver ON (V OUT = V DSon )
Release Point (B RP )
Magnetic flux density applied on the branded side of the package which turns the output
driver OFF (V OUT = high)
2
V2.00 May 1, 2012
SS41
Bipolar Hall-Effect Position Sensor
Pin Definitions and Descriptions
SOT Pin №
SIP Pin №
Name
Type
Function
1
1
VDD
Supply
Supply Voltage pin
2
3
OUT
Output
Open Drain Output pin
3
2
GND
Ground
Ground pin
Absolute Maximum Ratings
Parameter
Symbol
Supply Voltage
Value
Units
VDD
28
V
Supply Current
IDD
50
mA
Output Voltage
VOUT
28
V
Output Current
IOUT
50
mA
Storage Temperature Range
TS
-65 to 170
°C
Absolute maximum ratings
Operating Temperature Range
Symbol
Value
Units
Temperature Suffix “E”
TA
-40 to 85
°C
Temperature Suffix “K”
TA
-40 to 125
°C
Temperature Suffix “L”
TA
-40 to 150
°C
Exceeding the absolute maximum ratings may cause permanent damage. Exposure to absolute-maximum- rated conditions for
extended periods may affect device reliability.
3
V2.00 May 1, 2012
SS41
Bipolar Hall-Effect Position Sensor
General Electrical Specifications
DC Operating Parameters T A = 25℃, V DD = 4.5V to 24V (unless otherwise specified)
Typ
Max
Units
24
V
5
10
mA
IOUT = 20mA, B > B OP
0.4
0.5
V
IOFF
B < B RP VOUT = 24V
0.01
5
µA
Output Rise Time
tr
RL = 1KΩ, CL = 20pF
0.3
1.5
µs
Output Fall Time
tf
RL =1KΩ, CL = 20pF
0.3
1.5
µs
Parameter
Symbol
Test Conditions
Supply Voltage
VDD
Operating
Supply Current
IDD
B < B RP
Output Saturation Voltage
VDSon
Output Leakage Current
Min
4.5
批注 [PKU1]: 漏电流怎么差
别这么大? Magnetic Specifications
DC Operating Parameters VDD = 4.5V to 24V (unless otherwise specified)
Parameter
Symbol
Operating Point
B OP
Release Point
B RP
Hysteresis
B HYS
Test Conditions
Ta=25℃,Vdd=5V DC
Min
Typ
Max
Units
5
37
70
G
-70
-37
-5
G
75
G
Application Information
4
V2.00 May 1, 2012
SS41
Bipolar Hall-Effect Position Sensor
Package Information
Package F, 3-Pin SIP:
5
V2.00 May 1, 2012
SS41
Bipolar Hall-Effect Position Sensor
Package FT, 3-Pin SOT-23:
Ordering Information
Part No.
Pb-free
Temperature Code
Package Code
Packing
SS41ESOT
YES
-40°C to 85°C
SOT-23
7-in. reel, 3000 pieces/ reel
SS41EUA
YES
-40°C to 85°C
TO-92
Bulk, 1000 pieces/ bag
SS41KSOT
YES
-40°C to 125°C
SOT-23
7-in. reel, 3000 pieces/ reel
SS41KUA
YES
-40°C to 125°C
TO-92
Bulk, 1000 pieces/ bag
SS41LSOT
YES
-40°C to 150°C
SOT-23
7-in. reel, 3000 pieces/ reel
SS41LUA
YES
-40°C to 150°C
TO-92
Bulk, 1000 pieces/ bag
6
V2.00 May 1, 2012