SHD115524 SHD115524B SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 628, REV. B Formerly part number SHD1154/A/B HERMETIC POWER SCHOTTKY RECTIFIER Very Low Voltage Drop DESCRIPTION: 100 VOLT, 45 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-2/2B PACKAGE. MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. RATING SYMBOL MAX. UNITS PIV 100 Volts IO 45 Amps IFSM 200 Amps MAXIMUM THERMAL RESISTANCE (per leg) R 0.7 C/W MAXIMUM JUNCTION TEMPERATURE RANGE Top -65 to + 175 C MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE Tstg -65 to + 175 C SYMBOL MAX. UNITS Vf 0.89 Volts PEAK INVERSE VOLTAGE O MAXIMUM DC OUTPUT CURRENT @ TC=100 C MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t = 8.3ms, Sine) (per leg) JC ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 45 Amps) (per leg) TJ = 25 C 0.70 TJ = 125 C MAXIMUM REVERSE CURRENT (Ir @ 100V PIV) (per leg) TJ = 25 C Ir mA 20 TJ = 125 C MAXIMUM JUNCTION CAPACITANCE (Vr =5V) (per leg) 1.5 CT 1400 1999 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] pF SHD115524 SHD115524B SENSITRON DATA SHEET 628, REV. B MECHANICAL DIMENSIONS: In Inches / mm .465±.020 (11.8±.508) .315±.010 (8.00±.254) .315±.010 (8.00±.254) .315±.010 (8.00±.254) .150±.010 (3.81±.254) .315±.010 (8.00±.254) .015±.005 (.381±.127) Copper Anode .090 (2.29) Max .020±.005 R (.508±.127 ) Alumina Ring .075 (1.91) Max Moly Lid Moly Base (Cathode) Alumina Ring Moly Base SHD-2 .015±.002 (.381±.051) .060±.010 (1.52±.254) SHD-2B DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. 1999 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]