5400/DM5400/DM7400 Quad 2-Input NAND Gates General Description Features This device contains four independent gates each of which performs the logic NAND function. Y Alternate Military/Aerospace device (5400) is available. Contact a National Semiconductor Sales Office/Distributor for specifications. Connection Diagram Dual-In-Line Package TL/F/6613 – 1 Order Number 5400DMQB, 5400FMQB, DM5400J, DM5400W or DM7400N See NS Package Number J14A, N14A or W14B Function Table Y e AB Inputs Output A B Y L L H H L H L H H H H L H e High Logic Level L e Low Logic Level C1995 National Semiconductor Corporation TL/F/6613 RRD-B30M105/Printed in U. S. A. 5400/DM5400/DM7400 Quad 2-Input NAND Gates June 1989 Absolute Maximum Ratings (Note) Note: The ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the ‘‘Electrical Characteristics’’ table are not guaranteed at the absolute maximum ratings. The ‘‘Recommended Operating Conditions’’ table will define the conditions for actual device operation. If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Supply Voltage 7V Input Voltage 5.5V Operating Free Air Temperature Range b 55§ C to a 125§ C DM54 and 54 DM74 0§ C to a 70§ C Storage Temperature Range b 65§ C to a 150§ C Recommended Operating Conditions Symbol DM5400 Parameter VCC Supply Voltage VIH High Level Input Voltage VIL Low Level Input Voltage IOH High Level Output Current IOL Low Level Output Current TA Free Air Operating Temperature DM7400 Units Min Nom Max Min Nom Max 4.5 5 5.5 4.75 5 5.25 2 V 2 V 0.8 0.8 V b 0.4 b 0.4 mA 16 mA 70 §C 16 b 55 125 0 Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted) Symbol Parameter Conditions Min Typ (Note 1) Max Units b 1.5 V VI Input Clamp Voltage VCC e Min, II e b12 mA VOH High Level Output Voltage VCC e Min, IOH e Max VIL e Max VOL Low Level Output Voltage VCC e Min, IOL e Max VIH e Min II Input Current @ Max Input Voltage VCC e Max, VI e 5.5V IIH High Level Input Current VCC e Max, VI e 2.4V 40 mA IIL Low Level Input Current VCC e Max, VI e 0.4V b 1.6 mA IOS Short Circuit Output Current VCC e Max (Note 2) ICCH Supply Current with Outputs High VCC e Max 4 8 mA ICCL Supply Current with Outputs Low VCC e Max 12 22 mA 2.4 3.4 V 0.2 0.4 V 1 mA DM54 b 20 b 55 DM74 b 18 b 55 mA Switching Characteristics at VCC e 5V and TA e 25§ C (See Section 1 for Test Waveforms and Output Load) Symbol Parameter Conditions tPLH Propagation Delay Time Low to High Level Output CL e 15 pF RL e 400X tPHL Propagation Delay Time High to Low Level Output Note 1: All typicals are at VCC e 5V, TA e 25§ C. Note 2: Not more than one output should be shorted at a time. 2 Min Max Units 22 ns 15 ns Physical Dimensions inches (millimeters) 14-Lead Ceramic Dual-In-Line Package (J) Order Number 5400DMQB or DM5400J NS Package Number J14A 14-Lead Molded Dual-In-Line Package (N) Order Number DM7400N NS Package Number N14A 3 5400/DM5400/DM7400 Quad 2-Input NAND Gates Physical Dimensions inches (millimeters) (Continued) 14-Lead Ceramic Flat Package (W) Order Number 5400FMQB or DM5400W NS Package Number W14B LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.