11-MD111 Version Issue Date File Name Total Pages : A.001 : 2008/07/23 : SP-MD111-A.001.doc :7 Low-saturation, Low-voltage 1.5 Channel Bi-directional Motor Driver SILICON TOUCH TECHNOLOGY INC. 新竹市科學園區展業一路九號七樓之一 9-7F-1 Prosperity Road I Science-Based Industrial Park Hsinchu, Taiwan 300, R.O.C. Tel：886-3-5645656 Fax：886-3-5645626 點晶科技股份有限公司 MD111 SILICON TOUCH TECHNOLOGY INC. MD111 Low-saturation, Low-voltage 1 Channel Bi-directional Toy Motor Driver General Specifications The device is a 1-channel low-saturation bi-directional H-bridge driver IC. The design is optimal for DC motor in toy application with forward, reverse, brake and stand-by function. Features and Benefits z z z z z z Low voltage operation ( VDD Min = VSMin = 1.5V ) Low saturation voltage ( Upper transistor + low transistor residual voltage; 0.4V typ. at 300mA , VDD = VS = 3V) Low input current Brake function High output sinking and driving capability Thin, highly reliable package (SOP-8, MSOP8) Pin Assignment VS O2 O1 IN2 IN3 VDD GND IN1 Pin NO. Pin Name Description 1 VS Power supply pin for output driver 2 O1 Output sinking / driving pin 3 IN3 Input pin 3 that determines driving mode 4 GND 5 IN1 Input pin 1 that determines driving mode 6 VDD Power supply pin for controller. 7 IN2 Input pin 2 that determines driving mode 8 O2 Output sinking / driving pin Ground pin SP-MD111-A.001(Only For Toy Driver) Page：1 Version：A.001 點晶科技股份有限公司 MD111 SILICON TOUCH TECHNOLOGY INC. Absolute Maximum Ratings ( Unless otherwise noted, TA= 25℃ ) Characteristic Symbol Rating Unit VDD 6.5 V VS 6.5 V VIN VDD+0.4 V IO Peak Current IOPeak 2 A IODC Current IODC 0.80 A Power Dissipation(SOP8) PD-SOP 680 mW Power Dissipation(MSOP8) PD-MSOP 480 mW Operating Temperature Range TOPR -40 ~ 125 °C Storage Temperature Range TSTG -65 ~ 150 °C Supply Voltage Input Voltage Electrical Characteristic (Unless otherwise noted, TA= 25℃ & VDD = VS = 3V ) Characteristic Supply Voltage Sym. Condition Limit Unit Min. Typ. Max. VDD 1.5 3 6.5 V VS 1.5 3 6.5 V Supply Current IDD0 VIN1, IN2, IN3 = 0V 0.5 10 μA ( IDD + IS ) IDD1 VIN1, IN2, IN3 = 3V 1 10 μA IN1 / IN2 / IN3 Input Terminal ( TJ = 25℃) Input Voltage “H” VIH - 0.8*VDD - VDD+0. 4 V Input Voltage “L” VIL - -0.4 - 0.2*VDD V Input Current “H” IIH VIN = VDD - - ±5 μA Input Current “L” IIL VIN = 0 V - - ±5 μA O1 / O2 Output Terminal ( TJ = 25℃) Output Voltage (upper + lower) Output Sustaining Voltage VOUT1 IOUT = 200 mA - 0.3 0.45 V VOUT2 IOUT = 300 mA - 0.5 0.7 V VOUT3 IOUT = 600 mA - 0.9 1.0 V VO(SUS) IOUT = 400 mA - - VS V SP-MD111-A.001(Only For Toy Driver) Page：2 Version：A.001 點晶科技股份有限公司 MD111 SILICON TOUCH TECHNOLOGY INC. Truth Table Input Signal Output Driver Mode IN1 IN2 IN3 O1 O2 H L L H L M1Forward L H L L H M1Reverse H H L H H M1Brake L L L OFF OFF Standby H L H OFF H M2 Operation L H H OFF L M2 Operation H H H OFF H M2 Operation Block Diagram & Application Circuit VDD 6 IN1 1μF VS 1 5 O1 2 IN2 7 IN3 3 Control M1 8 O2 M2 GND SP-MD111-A.001(Only For Toy Driver) Page：3 4 Note. To select M2 operating, the external driver is required. Version：A.001 點晶科技股份有限公司 MD111 SILICON TOUCH TECHNOLOGY INC. Application Notes In multiple power supply application, the voltage of VDD pin must lager than or equal to the voltage of VS pin. The power dissipated by the IC varies widely with the supply voltage, the output current, and loading. It is important to ensure the application does not exceed the allowable power dissipation of the IC package. The recommended motor driver power dissipation versus temperature is depicted as follows: Power Dissipation ( mW ) Power Dissipation-Temperature 800 750 700 650 600 550 500 450 400 350 300 250 200 150 100 50 0 SOP8 MSOP8 0 25 50 75 100 Ambient Temperature ( ℃ ) SP-MD111-A.001(Only For Toy Driver) Page：4 125 Version：A.001 點晶科技股份有限公司 MD111 SILICON TOUCH TECHNOLOGY INC. Package Specifications SOP8 : MD111 ( 8-pin SOP ) MD111 XXXXXX * E C H θ L D SYMBOL 7°(4X) A2 A A1 e B * The package marking “XXXXXX” is a lot number and therefore being subject to change. Dim ensions in Millim eter MIN NOM MAX A 1.346 － 1.753 A1 0.102 － 0.254 A2 1.346 － 1.499 B C D 4.801 0.406 0.203 － 4.978 E 3.988 3.810 － e H 5.791 1.270 － 6.198 L 0.406 － 1.270 θ 0° － 8° MSOP8 : MD111 (8-pin MSOP ) MD111 E1 XXXX* E C θ L1 L D 12°(4X) Dimensions in Millimeter SYMBOL A2 A A1 y b e MIN NOM MAX A － － 1.100 A1 0.000 － 0.150 A2 0.750 0.850 0.950 b 0.300 BSC D 3.000 BSC E 4.900 BSC E1 3.000 BSC e * The lot number “XXXX” in product code will also be subject to change on the package marking. SP-MD111-A.001(Only For Toy Driver) Page：5 L 0.650 BSC 0.400 L1 θ 0.600 0.800 0.950 REF 0° － 8° Version：A.001 點晶科技股份有限公司 MD111 SILICON TOUCH TECHNOLOGY INC. The products listed herein are designed for ordinary electronic applications, such as electrical appliances, audio-visual equipment, communications devices and so on. Hence, it is advisable that the devices should not be used in medical instruments, surgical implants, aerospace machinery, nuclear power control systems, disaster/crime-prevention equipment and the like. Misusing those products may directly or indirectly endanger human life, or cause injury and property loss. Silicon Touch Technology, Inc. will not take any responsibilities regarding the misusage of the products mentioned above. Anyone who purchases any products described herein with the above-mentioned intention or with such misused applications should accept full responsibility and indemnify. Silicon Touch Technology, Inc. and its distributors and all their officers and employees shall defend jointly and severally against any and all claims and litigation and all damages, cost and expenses associated with such intention and manipulation. SP-MD111-A.001(Only For Toy Driver) Page：6 Version：A.001