SPI FSP250

Sparkle Power Inc.
A Leading Power Supply Manufacturer
Web site: www.sparklepower.com
U
FSP250-60MPC
(80PLUS BRONZE, RoHS Compliant)
250 Watts FLEX ATX Medical Grade Power Supply
Features
•
Complied with FLEX ATX and ATX12V standard
•
Active Power Factor Correction (PFC) meet EN61000-3-2
•
High efficiency and reliability
•
Compatible with European Union Directive 2002/95/EC
Specification
•
Temperature Range: Operating: 0°C ~ +50°C ; storage &
shipping: -20°C ~ +80°C
(Restriction on Hazardous Substances).
•
Remote ON/OFF function
•
Humidity: 85% on operating,95% on storage
•
Internal 12V DC fan included
•
Dielectric Withstand: Primary frame ground 1800V AC for
•
Low noise and ripple
•
Output over voltage, short circuit, and over current protection
•
Efficiency: 82% minimum
•
100% Hi-pot, ATE, and burn-in tested
•
Rise time: Less than 20ms
•
Re-settable power shut down
•
Hold-up Time: 14ms minimum at nominal input voltage
•
FCC Part 15 Subpart J, Class ‘B’ 115 Vac operation. CISPR 22
•
Power Good Signal: Power on delay time 100 ~ 500ms, off
1 second
delay 1ms minimum (TTL compatible)
Class ‘B’ 230 Vac operation.
•
Approved by UL 60601, TUV 60601, FCC, EMC,CE, CB
•
Leakage Current: Less than 0.5mA at 264Vac,50Hz
REPORT(IEC 60601)
•
MTBF: 100,000 hours on maximum load at 25°C
•
Dimensions (LxWxH):
Input Characteristics
190cm x 81cm x 40.5cm
Input Range: 90 ~ 265Vac , Full Range Input
Frequency: 47 ~ 63Hz
Input Current: Max 4A @ 115Vac,2A @ 230Vac
Inrush Current: No damage
Output Characteristics
(1)
The +3.3V and +5V total output shall not exceed 80W.
Sparkle Power Inc.
Main Office
1000 Rock Avenue
San Jose, CA 95131
TEL: 408-519-8888
FAX: 408-519-9999
E-MAIL: [email protected]
Sparkle Power Inc.
Los Angeles Office
17071 Green Drive
City of Industry, CA 91745
TEL: 626-839-7180
FAX: 626-839-3395