SZN5063 thru SZN5117 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 3.0 WATT 6.8 – 400 VOLTS ZENER DIODES DESIGNER’S DATA SHEET FEATURES: Hermetically Sealed in Glass (Available in Frit Glass see SSDI datasheet # Z00004) Rated at 3.0 W Available in Axial, Round Tab Surface Mount (SM) and AXIAL (__) Square Tab Surface Mount (SMS) version Available to TX, TXV, and Space Levels 7/ Zener Voltage, 10%, 5%, 2% or 1% Tolerance Replacement for 1N5063 thru 5117 Maximum Ratings Symbol Value Units Maximum Zener Current VZ IZM 6.8 - 400 7.0 - 440 V mA Forward Surge Current (8.3 msec Puls) IFSM .06 – 10 A PD Top Tstg 3.0 -65 to +175 -65 to +200 W RθJL 65 ºC/W RθJE 30 ºC/W Nominal Zener Voltage Continuous Power Operating and Storage Temp. Thermal Resistance, Junction to Lead L=3/8” (Axial) Thermal Resistance, Junction to End Cap (SM / SMS) __ __ __ │ │ │ └ Screening 7/ │ │ │ __ = Not Screened │ │ │ TX = TX Level │ │ │ TXV = TXV │ │ │ S = S Level └ Package Type │ │ │ │ __ = Axial Leaded │ │ SM = Surface Mount Round Tab │ │ SMS = Surface Mount Square Tab │ │ └ Tolerance │ A = 10% │ B = 5% ( JEDEC Registration) │ C=2% │ D = 1% │ │ └ Voltage/Family 5063 thru 5117 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. MIN. .055” .130” 1.00” .028” MAX .085” .175” --.034” ROUND TAB (SM) ºC Part Number/Ordering Information 6/ SZN __ DIM A B C D DIM A B C D MIN. .077” .130” .010” +.000” MAX. .083” .146” .022” --- SQUARE TAB (SMS) DIM A B C D MIN. .090” .175” .022” MAX. .100” .215” .028” Body to Tab Clearance: .001” All dimensions are prior to soldering DATA SHEET #: Z00009E DOC SZN5063 thru SZN5117 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics @ 25°C Nominal Zener Voltage (note 1) Zener Test Current Maximum Zener Impedance (note 2) Maximum Continuous Current (note 3) Regulation Iz = 10% to 50% of Iz max Maximum Surge Current (note 4) VZ @ IZT IZT ZZ @ IZT IZM ∆Vz IFSM VR I(note 8)R Vf V mA Ω mA V A V µA V SZN5063 SZN5064 SZN5065 SZN5066 SZN5067 SZN5068 SZN5069 SZN5070 SZN5071 SZN5072 SZN5073 SZN5074 SZN5075 SZN5076 SZN5077 SZN5078 SZN5079 SZN5080 SZN5081 SZN5082 6.8 7.5 8.2 9.1 10 11 13 14 15 16 18 22 24 27 30 33 36 39 40 43 75 75 75 75 75 70 50 50 50 50 40 30 30 25 25 440 400 360 330 300 275 230 210 200 185 170 135 125 110 100 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.8 0.9 1.0 1.8 2.0 2.0 2.5 10.0 8.0 7.0 6.0 5.0 4.5 4.0 4.0 3.0 3.0 2.0 2.0 1.5 1.5 1.5 5.2 5.7 6.2 6.9 7.6 8.4 9.9 10.7 11.4 12.2 13.7 16.7 18.2 20.6 22.8 90 85 80 75 70 2.8 3.0 3.0 3.0 3.3 1.2 1.0 1.0 1.0 0.8 25.1 27.4 29.7 30.4 32.7 500 300 200 100 40 25 10 10 10 5 5 5 5 1 1 1 1 1 1 1 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 20 20 20 20 15 2 2 3 3 4 5 6 6 6 7 8 10 10 12 15 21 21 27 27 35 SZN5083 SZN5084 SZN5085 SZN5086 SZN5087 SZN5088 SZN5089 SZN5090 SZN5091 SZN5092 SZN5093 SZN5094 SZN5095 SZN5096 SZN5097 45 47 50 51 56 60 62 68 70 75 80 82 91 110 120 15 15 15 15 10 10 10 10 10 10 10 10 8.0 5.0 5.0 37 43 50 50 70 70 75 85 90 100 115 120 155 250 325 65 62 60 60 55 50 45 45 45 40 35 35 30 25 25 3.5 3.5 3.6 3.8 4.0 4.8 4.8 5.7 5.8 6.8 7.7 7.8 8.0 9.0 11 0.8 0.8 0.8 0.80 0.70 0.60 0.60 0.60 0.60 0.50 0.40 0.40 0.40 0.30 0.20 34.2 35.8 38.0 38.8 42.6 45.6 47.1 51.7 53.3 56.0 60.9 62.2 69.2 83.6 91.2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 PART NUMBER NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Maximum Reverse Leakage Current DATA SHEET #: Z00009E Forward Voltage Drop @ 1A 1.5 1.5 1.5 1.5 1.5 DOC SZN5063 thru SZN5117 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics @ 25°C Nominal Zener Voltage (note 1) Zener Test Current Maximum Zener Impedance (note 2) Maximum Continuous Current (note 3) Regulation Iz = 10% to 50% of Iz max Maximum Surge Current (note 4) VZ @ IZT IZT ZZ @ IZT IZM ∆Vz IFSM VR IR Vf V mA Ω mA V A V µA V SZN5098 SZN5099 SZN5100 SZN5101 SZN5102 130 140 160 170 180 5.0 5.0 4.0 4.0 4.0 375 550 700 750 850 20 20 20 18 18 14 14 16 16 17 0.20 0.20 0.15 0.15 0.10 98.8 106.4 121.6 129.2 136.8 1 1 1 1 1 1.5 1.5 1.5 1.5 1.5 SZN5103 SZN5104 SZN5105 SZN5106 SZN5107 SZN5108 SZN5109 SZN5110 SZN5111 SZN5112 SZN5113 SZN5114 SZN5115 SZN5116 SZN5117 190 200 220 240 260 270 280 300 320 330 340 360 380 390 400 4.0 4.0 3.0 3.0 3.0 3.0 3.0 3.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 900 950 1100 1300 1500 1600 1700 1900 2100 2250 2400 2700 3000 3250 3500 15 15 15 12 12 10 10 10 9 9 8 8 8 7 7 17 17 18 21 21 22 23 26 26 30 33 33 34 37 40 0.10 0.10 0.09 0.09 0.08 0.08 0.08 0.07 0.07 0.06 0.06 0.06 0.06 0.06 0.06 144.7 152.0 167 182 198 206 213 228 244 251 259 274 289 297 304 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 PART NUMBER Maximum Reverse Leakage Current (note 8) Forward Voltage Drop @ 1A NOTES: 1/ All zener voltages are measured with an automated test set using a 20-50 msec test time. Longer or shorter test time will have a corresponding effect on the measured value due to heating effects. 2/ Zener impedance is derived from the AC voltage divided by the AC current with RMS value of 10% of DC zener test current superimposed on the test current. 3/ Ratings based on maximum zener voltage of individual units (leaded units). 4/ Figures shown are for a peak sinusoidal surge current of 8.3 msec duration, non-repetitive. The 8.3 msec square pulse rating is 71% of the value shown. 5/ SSDI standard marking consists of a contrasting color cathode dot or band. Part number information is included on packaging labels. 6/ For Ordering Information, Price, and Availability- Contact Factory. 7/ Screening based on MIL-PRF-19500. Screening flows available on request. 8/ For 10% tolerance devices, reduce Vr test voltage by 5% NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: Z00009E DOC