GPP10A THRU GPP10M 50V-1000V 1.0A GLASS PASSIVATED JUNCTION RECTIFIER FEATURES • Plastic package has Underwriters Laboratories Flammability Classification 94V-0 • Glass passivated junction • Capable of meeting environmental standards of MIL-S-19500 • 1.0A operation at TA = 75°C with no thermal runaway • Typical IR less than 0.1µA MECHANICAL DATA Case: JEDEC DO-204AL, molded plastic over glass passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.012 oz., 0.3 g MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL GPP10A GPP10B GPP10D GPP10G GPP10J GPP10K GPP10M UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current 0.375" (9.5 mm) lead length at TA = 75 °C IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A Maximum full load reverse current, full cycle average 0.375" (9.5 mm) lead length TA = 75 °C IR(AV) 30 μA TJ, TSTG - 55 to + 150 °C Operating junction and storage temperature range ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage 1.0 A Maximum DC reverse current at rated DC blocking voltage Maximum junction capacitance SYMBOL GPP10A GPP10B VF GPP10D GPP10G 1.1 TA = 25 °C V μA TA = 100 °C E-mail: [email protected] GPP10K GPP10M UNIT 5.0 IR 4.0 V, 1 MHz GPP10J 50 6 CJ 1 of 2 pF Web Site: www.taychipst.com GPP10A THRU GPP10M 50V-1000V 1.0A GLASS PASSIVATED JUNCTION RECTIFIER RATINGS AND CHARACTERISTIC CURVES 100 Instantaneous Forward Current (A) 1.4 Average Forward Current (A) GPP10A THRU GPP10M 1.2 1.0 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 10 1 0.1 0.01 0.4 175 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Instantaneous Forward Voltage (V) Fig. 1 - Forward Current Derating Curve Fig. 2 - Typical Instantaneous Forward Characteristics Per Diode 10 100 TA = 125 °C Junction Capacitance (pF) Instantaneous Reverse Current (μA) 0.6 Ambient Temperature (°C) 1 0.1 TA = 25 °C 1 0.1 0.01 0 20 40 60 80 10 100 1 10 Percent of Rated Peak Reverse Voltage (%) Reverse Voltage (V) Fig. 3 - Typical Reverse Characteristics Fig. 4 - Typical Junction Capacitance E-mail: [email protected] 2 of 2 100 Web Site: www.taychipst.com