MBRA 120 THRU MBRA100 20V-100V SURFACE MOUNT SCHOTTK Y BARRIER RECTIFIER 1.0A FEATURES • Plastic package has Underwriters Laboratory flammability classification 94V-0 • Metal silicon junction, majority carrier conduction • For surface mount applications • Guard ring for overvoltage protection • Low power loss, high efficiency • High current capability, low forward voltage drop • High surge capability MECHANICAL DATA • Case: SMA (DO-214AC), molded plastic body • Terminals: solder plated, solderable per MIL-STD-750, method 2026 • Polarity: color band denotes cathode end MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS . Ratings at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, resistive or inductive load. For capacitive load, derate by 20%. Parameter Symbols MBRA120 MBRA130 MBRA140 MBRA150 MBRA160 MBRA180 MBRA100 Units Maximum Repetitive Peak Reverse Voltage VRRM 20 30 40 50 60 80 100 V Maximum RMS Voltage VRMS 14 21 28 35 42 56 70 V Maximum DC Blocking Voltage VDC 20 30 40 50 60 80 100 V Maximum Average Forward Rectified Current IF(AV) 1 A Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC method) IFSM 40 A Maximum Forward Voltage at 1 A 1) Maximum DC Reverse Current at Ta = 25 OC Rated DC Blocking Voltage 1) Ta = 100 OC Typical Thermal Resistance 2) VF Storage Temperature Range TS 1) Pulse test: 300 µs pulse width, 1% duty cycle 2) P.C.B mounted with 0.2 X 0.2" (5 X 5 mm) copper pad areas 1 of 2 0.85 V mA 10 RθJA RθJL TJ 0.75 0.2 IR Operating Junction Temperature Range E-mail: [email protected] 0.55 88 28 - 65 to + 125 C/W O - 65 to + 150 - 65 to + 150 C O C O Web Site: www.taychipst.com MBRA 120 THRU MBRA100 SURFACE MOUNT SCHOTTK Y BARRIER RECTIFIER RATINGS AND CHARACTERISTIC CURVES E-mail: [email protected] 2 of 2 20V-100V 1.0A MARA120 THRU MBRA100 Web Site: www.taychipst.com