SOD1E1 THRU SOD1E8 50V-600V SURFACE MOUNT RECTIFIER 1.0A FEATURES SOD-123FL Glass passivated device Ideal for surface mounted applications Low leakage current Metallurgically bonded construction High temperature soldering: ℃/10 seconds at terminals Mechanical Data Case:JEDEC SOD-123FL,molded plastic over passivated chip Terminals:Solder Plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.003 ounces, 0.01 gram Mounting position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase,half wave,60Hz,resistive or inductive load.For capactive load,derate current by 20%. Device marking code SOD 1E1 E1 SOD 1E2 E2 SOD SOD SOD SOD SOD SOD 1E3 1E4 1E5 1E6 1E7 1E8 UNITS E3 E4 E5 E6 E7 E8 Maximum recurrent peak reverse voltage VRRM 50 100 150 200 300 400 500 600 V Maximum RMS voltage VRMS 35 70 105 140 210 280 350 420 V Maximum DC blocking voltage VDC 50 100 150 200 300 400 500 600 V Maximum average forward rectified current T A=65℃ I(AV) 1.0 A IFSM 25 A Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load T L=25℃ Maximum instantaneous (NOTE 1) VF forward voltage at 1.0A Maximum DC reverse current @TA=25℃ 0.95 5.0 IR at rated DC blocking voltage @T A=125℃ 1.25 150 1.7 V µA Maximum reverse recovery time (NOTE 2) trr 35 ns Operating temperature range Tj - 55 --- + 150 ℃ TSTG - 55 --- + 150 ℃ Storage temperature range NOTES:1.Pulse test:300ms pulse width,1% duty cycle. 2.Measured with IF=0.5A, IR=1A, Irr=0.25A. E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com SOD1E1 THRU SOD1E8 50V-600V SURFACE MOUNT RECTIFIER RATINGS AND CHARACTERISTIC CURVES 1.0 .8 .6 .4 Single Phase Half Wave 60Hz Resistive or Inductive Load .2 0 0 25 50 75 100 125 150 175 SOD1E1 THRU SOD1E8 FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 25 20 15 10 5 8.3ms Single Half Sine-Wave (JEDED Method) 0 1 0.1 0.01 .4 Tj=25oC Pulse Width=300 s 1% Duty Cycle .6 .8 1.0 1.2 1.4 1.6 1.8 6 8 10 20 40 60 80 100 100 TJ = 100 10 4 1 .4 TJ = 25 .1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) INSTANTANEOUS FORWARD VOLTAGE, (V) E-mail: [email protected] 4 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (uA) SO SO D1 E5 D1 -SO E7 -SO D1 E6 D1 E8 100 SO D1 E1 -SO D1 E4 INSTANTANEOUS FORWARD CURRENT, (A) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1 2 NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE, ( ) 10 1.0A 2 of 2 Web Site: www.taychipst.com