V846ME07-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Test and Measurement • Satellite Up/Down Conversion • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 3000 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -87 Harmonic Suppression (2nd) -25 Tuning Voltage 0.3 Max Units 3700 MHz dBc/Hz -15 dBc 11.7 Vdc MHz/V 85 Tuning Sensitivity (avg.) 4 dBm Input Capacitance 50 pF Pushing 12 MHz/V Pulling (14 dB Return Loss, Any Phase) 5 MHz 85 °C Max Units Power Output -1 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 1.5 MINI-14H-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 22 Vdc 27 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V846ME07-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. 3900 FREQUENCY (MHz) 3800 3700 3600 3500 3300 85 °C 25 °C 3200 -40 °C 3400 3100 3000 2900 2800 0 0.9 1.8 2.7 3.6 4.5 5.4 6.3 7.2 8.1 9 9.9 10.8 11.7 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 5 4 3 2 1 0 0.030 MIN. CUTBACK FROM LIVE PADS -1 -2 -3 -4 -5 2913 3065 3186 3301 3421 3538 3636 3704 3748 3777 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14H 0.220 MINI-14H-LOW 0.160 MINI-14H-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B