3M™ Accessories .100" x .100" Wiremount Socket Breakaway Tab .5 [ 13 ] Keying Plug 3435-0 3435 .24 [ 6.1 ] .032 [ 0.81 ] See Note 3 A Material: Gray Polyester (PBT) 3.00 [ 76.2 ] .051 [ 1.30 ] .026 [ 0.66 ] See Note 1 RoHS* compliant Contact Quantity 6 8 10 14 16 20 24 26 30 34 36 40 44 50 60 Dim B Dim C .48 [ 12.2 ] .58 [14.7 ] 0.68 [ 17.3 ] 0.88 [ 22.4 ] 0.98 [ 24.9 ] 1.18 [ 30.0 ] 1.38 [ 35.1 ] 1.48 [ 37.6 ] 1.68 [ 42.7 ] 1.88 [ 47.8 ] 1.98 [ 50.3 ] 2.18 [ 55.4 ] 2.38 [ 60.5 ] 2.68 [ 68.1 ] 3.18 [ 80.8 ] n/a n/a 0.62 [ 15.7 ] 0.82 [ 20.8 ] 0.92 [ 23.4 ] 1.12 [ 28.4 ] 1.32 [ 33.5 ] 1.42 [ 36.1 ] 1.62 [ 41.1 ] 1.82 [ 46.2 ] 1.92 [ 48.8 ] 2.12 [ 53.8 ] 2.32 [ 58.9 ] 2.62 [ 66.5 ] 3.12 [ 79.2 ] 3490-X Standard Pull Tab 3490 *"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated in writing by 3M, this information represents 3M's knowledge and belief based on information provided by third party suppliers to 3M. Recessed for Cable Exit .24 [ 6.1 ] B .22 [ 5.6 ] .63 [ 16.0 ] .15 [ 3.8 ] Plastic Material: Gray Polyester (PBT) C See Note 1 See Note 2 .08 [ 2.0 ] .53 Ref [ 13.5 ] 3M Part Number Dimension A ± .02 3490-1 0.50 [ 12.7 ] 3490-2 1.00 [ 25.4 ] 3490-3 1.50 [ 38.1 ] 3490-4 2.00 [ 50.8 ] 3490-5 2.50 [ 63.5 ] 3490-7 3.10 [ 78.7 ] 3490-6 3.25 [ 82.6 ] 3490-9 “No Product Labeling” 1.50 [ 38.1] width 2.00 [ 50.8 ] length 3490-10 0.26 [ 6.6 ] Notes: 1. Matte finish for ink labeling. 2. Material: Polyester Thickness: .005 ± .001 Flammability: Oxygen index minimum 28, ASTM D-2863. 3. Material: Double sided adhesive tape with liner. 4. RoHS compliant*. .10 [ 2.5 ] Metal Material: Stainless Steel pasivated Strain Relief 3448-X0XX Type: 2 = Metal 10-60 Position 3 = Plastic XX= ‘‘Contact Quantity'' of Socket: (i.e. 50 for 50 Position Strain Relief) Note: 1. The notch is non-existent on 40 position and larger. 2. RoHS* compliant 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com Inch [mm] Tolerance Unless Noted Inch .0 .0. .00. ±.1 ±.01 ±..005 [ ] Dimensions for Reference Only Date Modified: April 3, 2013 TS-0720-E Sheet 1 of 1 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Accessories .100" x .100" Wiremount Socket Polarizing Post .318 [8.08] 3 2 0 1 -4 3 2 0 1 -5 LCP PBT B la c k G ra y .100 Dia [2.54] Note: Insert Post into one mounting hardware hole on bottom of header. Set post to protrude .115” [2.92] Polarizing Keys Dim A N3518 LCP Black .02 3518 PBT Gray .02 Breakaway Tab .09 [2.3] .34 Ref [8.6] A .15 [3.8] Note: #2216 B/A Scotchweld can be used to adhere keys. Mounting Hardware 3341-5 (Installed from bottom of board) 3341-6 (Must be inserted prior to latch on vertical headers) .50 [12.7] .31 [7.9] Panhead Thread Cutting Screw: #4-24 X 5/16” Type: USA Std BT, Federal BG Hex Head Bolt, Nut and Washer Bolt - #2-56 X 1/2” 3341-5 & 6 Material - Stainless Steel TS-0720-E Sheet 2 of 2 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M is a trademark of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnectors.com Please recycle. Printed in USA. © 3M 2012. All rights reserved. RIA-2217B-E Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3M: 3448-2016 3448-2020 3448-2024 3448-2026 3448-2030 3448-2060 3448-3044 3490-10 3490-2 3448-3026 3490-4 3490-6 3490-5 3490-1 3490-3 3448-3016 3448-3010 3448-3014 3448-3050 3448-3034 3448-3030 3448-3024 3448-3020 3448-3040 3448-3060 3448-2014 3448-2010 3448-2034 3448-2050 3448-2040 3448-3036 3490-7 3435-0