CERAMIC SURFACE MOUNT LOW PROFILE QUARTZ CRYSTALS ABMM2 Pb RoHS/RoHS II Compliant 6.0 x 3.6 x 1.2 mm | | | | | | | | | | | | | FEATURES: • Suitable for RoHS compliant reflow • Low height 1.2 mm max • Seam sealed ceramic package assures high reliability • Available tight tolerance and stability APPLICATIONS: • Computers, Modems, Microprocessors • Communication, Test equipment • PCMCIA STANDARD SPECIFICATIONS: Parameters Minimum Frequency Range 7.3728 110.00 MHz Notes Standard rd Standard th Standard See options See options 5 Overtone Fundamental 100.01 – 110.00MHz 30.01 – 50.00MHz -10 -40 -20 +60 +85 +20 ºC ºC ppm -20 +20 ppm 7.0 Ω pF See table 1 below Load capacitance (CL) 18.0 Drive Level Aging Insulation Resistance 100 -2 500 TABLE 1- Standard ESR Frequency (MHz) 7.3728 -7.999999 (Fund) 8.000 -9.999999 (Fund) 10.000 -50.000 (Fund) 30.000 – 100.000 (3rd OT) 100.001 – 110.000 (5th OT) ESR(Ω) max 150 72 50 60 80 ABRACON IS ISO9001:2008 CE RTIFIED Units 3 Overtone 30.01 – 100.00MHz Operating Temperature Storage Temperature Frequency Tolerance @+25°C Frequency Stability over the Operating Temperature ( ref. to +25°C) Equivalent series resistance (R1) Shunt capacitance (C0) Maximum Fundamental 7.3728 – 30.00MHz Operation Mode Typical 500 +2 See options See options pF Standard (See options if µW ppm MΩ @25°C±3°C First year @ 100Vdc ± 15V other than STD) Revised: 01.18.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com | | CERAMIC SURFACE MOUNT LOW PROFILE QUARTZ CRYSTALS ABMM2 Pb RoHS/RoHS II Compliant 6.0 x 3.6 x 1.2 mm | | | | | | | | | | | | | OPTIONS & PART IDENTIFICATION: (Left blank if standard) ABMM2 - MHz - - - - - Frequency in MHz Please specify the frequency in MHz. e.g. 16.000MHz Packaging Blank: Bulk T: 1000pcs / reel T2: 250pcs / reel Load Capacitance (pF) Please specify CL in pF (8 to 33pF) or S for series Please contact Abracon for other values Custom ESR if other than standard R□ □: Specify a value in Ω (e.g.: R40) ABRACON IS ISO9001:2008 CE RTIFIED Freq. Stability Blank: Standard F; fund. AT for F>30MHz Freq. Tolerance 1: ± 10 ppm 7: ± 15 ppm Freq uen c y S tability (ppm) Ope rating Te mp. ±10 ±20 ±30 ±50 ±10 0 0°C ~ +50° C A3 A4 A6 ----- ----- -10 °C ~ +50°C B3 B4 B6 ----- ----- -10 °C ~ +60°C C1 Std C6 ----- ----- -20 °C ~ +70°C E1 E2 E6 ----- ----- -40 °C ~ +85°C ----- D1 D6 D5 ----- -40°C ~ +1 05°C ----- ----- ----- J5 J 10 -40°C ~ +1 25°C ----- ----- ----- K5 K10 Revised: 01.18.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com | | CERAMIC SURFACE MOUNT LOW PROFILE QUARTZ CRYSTALS ABMM2 Pb RoHS/RoHS II Compliant 6.0 x 3.6 x 1.2 mm | | | | | | | | | | | | | OUTLINE DRAWING: Dimensions: inches (mm) Note 1: A chamfer of 0.3mm may appear on pad 1 or 4 Note 2: A rounded pad may appear on pad 1 Note 3: Pin 2 and 4 are connected to the metal lid. Please connect to GND REFLOW PROFILE TAPE & REEL: T: Tape and reel (1,000pcs/reel) T2: Tape and reel (250pcspcs/reel) Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Revised: 01.18.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com | |