SOIC ADAPTER SOCKETS ACCUTEK MICROCIRCUIT CORPORATION DO YOU REMEMBER WHEN YOU COULD SOCKET THAT DIP IC FOR REMOVAL OR LATER REPLACEMENT, BUT NOW YOUR IC AND PC BOARD IS DESIGNED FOR SURFACE MOUNT NOW YOU CAN SOCKET THAT SOIC PACKAGE AND SOLDER THE SOCKET TO THE SITE THAT WAS DESIGNED FOR SURFACE MOUNT DESCRIPTION The Accutek family of SOIC Adapter Sockets is designed to allow the socketing of an SOIC packaged device onto the site originally designed for a surface mount component. This system consists of an adapter module constructed of a small PC Board with pins protruding out of the bottom and the SOIC is soldered onto the top surface. A surface mount socket is soldered onto your motherboard in the site that was designed to accept the SOIC device. The adapter may now be inserted into the socket and removed at any time for testing or replacement. FEATURES · · · · · · Socket adapters for 8, 14, 16, 18, and 20 pin SOIC devices Solders to the PCB site designed for standard surface mount SOIC’s Adapter comes fully assembled Can be provided as assembly only or full turnkey Custom configurations for special applications Ideal for Serial EEPROMs, programming of adapter also available ACCUTEK MICROCIRCUIT CORPORATION 5 NEW PASTURE ROAD NEWBURYPORT, MA 01950-4040 PHONE: 978-465-6200 FAX: 978-462-3396 Email: [email protected] Internet: www.accutekmicro.com AK14SOIC-ST AK08SOIC-ST 14 PIN SOIC 8 PIN SOIC 0.400" 0.250" 0.350" 0.300" 0.180" 0.350" 0.300" 0.180" END VIEW OF ADAPTER ABOUT TO BE INSERTED INTO THE SOCKET END VIEW OF ADAPTER ABOUT TO BE INSERTED INTO THE SOCKET 0.260" 0.260" 0.120" 0.120" 0.245" 0.245" BOTTOM VIEW BOTTOM VIEW 0.280" 0.280" 0.100" 0.100" AK16SOIC-ST AK18SOIC-ST 16 PIN SOIC 18 PIN SOIC 0.500" 0.450" 0.350" 0.300" 0.180" 0.350" 0.300" 0.180" END VIEW OF ADAPTER ABOUT TO BE INSERTED INTO THE SOCKET END VIEW OF ADAPTER ABOUT TO BE INSERTED INTO THE SOCKET 0.260" 0.260" 0.120" 0.120" 0.245" 0.245" BOTTOM VIEW BOTTOM VIEW 0.280" 0.280" 0.100" 0.100" AK20SOIC-ST AK20WSOIC-ST 20 PIN SOIC WIDE 20 PIN SOIC 0.550" 0.350" 0.550" 0.300" 0.180" END VIEW OF ADAPTER ABOUT TO BE INSERTED INTO THE SOCKET 0.260" 0.270" 0.450" END VIEW OF ADAPTER ABOUT TO BE INSERTED INTO THE SOCKET 0.260" 0.120" 0.120" 0.245" BOTTOM VIEW 0.245" BOTTOM VIEW 0.280" 0.100" 0.280" 0.100" ACCUTEKMICRO.COM 2/2011 AK08DS-SOSPA 8 PIN PROGRAMMING ADAPTER FOR EEPROM SOIC SOCKET. THIS ALLOWS PROGRAMMING USING PROGRAMMERS STANDARD DIP SOCKET 0.250" 0.400" OTHER PIN COUNT PROGRAMMING OR TEST SOCKETS ARE AVAILABLE FOR THIS PRODUCT. CONSULT THE FACTORY FOR PART NUMBER AND AVAILABILITY. 0.400" 0.050" 0.300" 0.320" 0.080" 0.125" 0.100" ACCUTEKMICRO.COM 2/2011