ACCUTEK AK61664Z_09

AK61664Z
16,384 x 16 Bit CMOS/BiCMOS
Static Random Access Memory
ACCUTEK
MICROCIRCUIT CORPORATION
DESCRIPTION
Front View
The Accutek AK61664 SRAM Module consists of fast high performance SRAMs mounted on a low profile 40 pin ZIP PCB. The module utilizes two 28 pin 64K x 4 SRAMs in 300 mil SOJ packages and
two decoupling capacitor chips mounted on each side of a printed
circuit board.
40-Pin ZIP
The SRAMs are interconnected on the module to have common I/O
functions, single output enable functions and common chip select.
The modules can be supplied in a variety of access time values from
8 nSEC to 45 nSEC in CMOS or BiCMOS technology.
The Accutek module is designed for the lowest height off the board,
consistent with the availability of commonly available SRAM SOJ
package configurations.
1
40
FEATURES
· 16,384 x 32 SRAM module in high density configuration
· 40 pin ZIP format
· Common I/O, single OE functions and common chip select CE
Function
· Low height 0.500 inch ZIP maximum
· Fast Access Times range from 12 nSEC to 45 nSEC, CMOS or
BiCMOS
· TTL compatible inputs and outputs
PIN NOMENCLATURE
A0 - A15
Address Inputs
WE
Write Enable
OE
Output Enable
CE
Chip Select
DQ1 - DQ16
Data In/Data Out
Vcc
5v Supply
Vss
NC
· Single 5 volt power supply - AK61664Z
· Single 3.3 volt power supply - AK61664Z/3.3
· Operating temperature range in free air, 00C to 700C
· Power (Typical)
CMOS
3.2 Watt Active
1.2 Watt Standby
PIN ASSIGNMENT
FUNCTIONAL DIAGRAM
PIN #
SYMBOL
PIN #
SYMBOL
1
DQ16
21
A11
2
Vss
22
A4
3
DQ15
23
A10
4
DQ1
24
A5
5
DQ14
25
A9
6
DQ2
26
A6
7
DQ13
27
A8
Ground
8
DQ3
28
A7
No Connect
9
Vss
29
DQ12
10
DQ4
30
DQ5
11
A15
31
DQ11
12
A0
32
DQ6
13
A14
33
Vss
14
A1
34
DQ7
15
A13
35
DQ10
16
A2
36
DQ8
17
A12
37
DQ9
18
A3
38
OE
19
Vcc
39
CE
20
Vss
40
WE
MODULE OPTIONS
Leaded ZIP: AK61664Z
Single In-Line Package
BiCMOS
4.8 Watt Active
1.3 Watt Standby
MECHANICAL DIMENSIONS
ORDERING INFORMATION
PART NUMBER CODING INTERPRETATION
Position
Inches
1 2 3 4 5 6 7 8
0.125
0.155
0.500
MAX
1
C
L
0.120
0.130
2.100
MAX
CLCL
0.050
TYP
0.100
TYP
Product
AK = Accutek Memory
2 Type
4 = Dynamic RAM
5 = CMOS Dynamic RAM
6 = Static RAM
3 Organization/Word Width
1 = by 1 16 = by 16
4 = by 4 32 = by 32
8 = by 8 36 = by 36
9 = by 9
4 Size/Bits Depth
64 = 64K
4096 = 4 MEG
256 = 256K
8192 = 8 MEG
1024 = 1 MEG 16384 = 16 MEG
5 Package Type
G = Single In-Line Package (SIP)
S = Single In-Line Module (SIM)
D = Dual In-Line Package (DIP)
W = .050 inch Pitch Edge Connect
Z = Zig-Zag In-Line Package (ZIP)
6 Special Designation
P = Page Mode
N = Nibble Mode
K = Static Column Mode
W = Write Per Bit Mode
V = Video Ram
7 Separator
- = Commercial 00C to +700C
M = Military Equivalent Screened
(-550C to +1250C)
I = Industrial Temperature Tested
(-450C to +850C)
X = Burned In
8 Speed (first two significant digits)
DRAMS
SRAMS
50 = 50 nS
8 =
8 nS
60 = 60 nS
12 = 12 nS
70 = 70 nS
15 = 15 nS
80 = 80 nS
20 = 20 nS
The numbers and coding on this page do not include all variations available but are shown as examples of the most widely
used variations. Contact Accutek if other information is required.
.050 x .050
ANGLE NOTCH
1
CL CL
0.350
MAX
EXAMPLES:
AK61664Z-12
64K x 16, 12 nSEC SRAM ZIP Module
ACCUTEK
MICROCIRCUIT CORPORATION
5 NEW PASTURE ROAD
NEWBURYPORT, MA 01950-4040
PHONE: 978-465-6200 FAX: 978-462-3396
Email: [email protected]
Internet: www.accutekmicro.com
Accutek reserves the right to make changes in specifications at any
time and without notice. Accutek does not assume any responsibility
for the use of any circuitry described; no circuit patent licenses are implied. Preliminary data sheets contain minimum and maximum limits
based upon design objectives, which are subject to change upon full
characterization over the specific operating conditions.